Hello All,
New to here, so I hope this first post is in the right place.
Just started a major overhaul of a 1949 built Ruston Bucyrus 10RB. This machine was originally a face shovel but has been used as a crane with 30ft boom for the last 25years. The engine is a Ruston & Hornsby 3VRH and is in good running order, the machinery all works but there is a lot of wear ( after 61years!) in the control linkages and clutches. It has power lowering boom.
Most of the cab steel work has disintegrated and we are planning to make the various panels ,copying what's left of the old ones. The cab is the old flat fronted type with "Georgian" style small windows in the left side and cab door. The windscreen is 3 horizontal glasses.
A couple of questions......
What would be the original colour scheme, internally and externally? Inside seems to have been dark green , in some parts but cream (or white,or grey) in others. Outside ,possibly maroon all over, but no real idea. It was certainly not the later maroon/ sand .
Secondly, there is a lot of wear on the conical rollers in the truck frame. Does anyone know a source of oversize rollers, something like plus a quarter inch? I know these were available at one time . Perhaps another way of taking up this wear?
Any info. would be greatly appreciated.
Thanks
Bill
Rebuilding 10RB
-
- Posts: 350
- Joined: Sun Feb 01, 2009 6:05 pm
- Real name: David Heighington
- Location: Sheffield UK
- Has thanked: 2 times
- Been thanked: 51 times
- Flag:
- Contact:
-
Topic author - Posts: 15
- Joined: Fri Aug 20, 2010 5:06 pm
- Real name: Bill Holmes
- Has thanked: 1 time
Re: Rebuilding 10RB
Hello,
A picture can be found here:
http://diggers-dumpers-plant.co.uk/Archive8.htm#10RB
and this is one we prepared earlier:
download/file.php?mode=view&id=24586
A picture can be found here:
http://diggers-dumpers-plant.co.uk/Archive8.htm#10RB
and this is one we prepared earlier:
download/file.php?mode=view&id=24586
You do not have the required permissions to view the files attached to this post.
-
- Moderator
- Posts: 4339
- Joined: Sun Aug 05, 2007 10:54 am
- Real name: martyn henley
- Has thanked: 38 times
- Been thanked: 50 times
- Flag:
Re: Rebuilding 10RB
Greetings Bill .. and a big welcome to CMN
I cant be sure, but i think RB used to use Lincoln green as the main colour for the old type superstructure ... however could it be that your machine has been painted in the owners colours .. ... the 22 looks good
Martyn
I cant be sure, but i think RB used to use Lincoln green as the main colour for the old type superstructure ... however could it be that your machine has been painted in the owners colours .. ... the 22 looks good
Martyn
-
- Posts: 6393
- Joined: Mon Nov 03, 2008 8:06 pm
- Real name: MARTYN WILLIAMS
- Location: South Wales
- Has thanked: 296 times
- Been thanked: 359 times
Re: Rebuilding 10RB
Hello Bill
Welcome to CMN, I love 10 and 22 RB's .
Looking forward to your input to CMN.
Regards
Martyn
Welcome to CMN, I love 10 and 22 RB's .
Looking forward to your input to CMN.
Regards
Martyn
-
- Posts: 5422
- Joined: Tue Jun 12, 2007 10:10 pm
- Real name: Nick Drew
- Has thanked: 437 times
- Been thanked: 208 times
Re: Rebuilding 10RB
Welcome to CMN Bill
I know you will enjoy your time here
Nick
I know you will enjoy your time here
Nick
Digger Man Blog at Earthmovers http://www.earthmoversmagazine.co.uk/?page_id=3092
Digger Man Blog Facebook page, https://www.facebook.com/groups/1422908344617046/
You Tube Channel https://www.youtube.com/channel/UC_PJQrzRauAM6ANLxhhcGFA
Digger Man Blog Facebook page, https://www.facebook.com/groups/1422908344617046/
You Tube Channel https://www.youtube.com/channel/UC_PJQrzRauAM6ANLxhhcGFA
-
- Moderator
- Posts: 8705
- Joined: Sun Aug 05, 2007 8:36 pm
- Real name: Jeremy Rowland
- Has thanked: 1888 times
- Been thanked: 1704 times
Re: Rebuilding 10RB
Hi Bill welcome to CMN.
I can show a couple of pictures of old RB10's that are now in preservation, I hope this gives you some idea of the colour scheme. I would expect that parts are still available from somewhere if not then its a "get some made time"
I'm sure a bit of net research will turn up a good link for you. Back to the colour scheme I seam to recall an article on one of these machines in a back issue of CP&M and that machine was in Lincoln green.
Jeremy
I can show a couple of pictures of old RB10's that are now in preservation, I hope this gives you some idea of the colour scheme. I would expect that parts are still available from somewhere if not then its a "get some made time"
I'm sure a bit of net research will turn up a good link for you. Back to the colour scheme I seam to recall an article on one of these machines in a back issue of CP&M and that machine was in Lincoln green.
Jeremy
You do not have the required permissions to view the files attached to this post.
-
- Posts: 790
- Joined: Sat Nov 29, 2008 2:40 am
- Real name: Dave
- Location: Northern England
- Has thanked: 57 times
- Been thanked: 5 times
- Contact:
Re: Rebuilding 10RB
Try the people at the Vintage Excavator Trust at Threkeld in Cumbria as they have a number of early RB machines up in the quarry there and are restoring several more.
They dont have a web site as such as far as i know at the moment but some info is on the mining museums web site.
There are photos of a number of the machines up there on the Tractor and Construction Plant Wiki web site (link below). Sorry canot repost any of my photos as non on this pc.
They dont have a web site as such as far as i know at the moment but some info is on the mining museums web site.
There are photos of a number of the machines up there on the Tractor and Construction Plant Wiki web site (link below). Sorry canot repost any of my photos as non on this pc.
Interested in Tractors, Plant, Heavy Haulage or Steam visit http://tractors.wikia.com/wiki/Tractor_%26_Construction_Plant_Wiki
Help document every manufacturer model build, and record every machine in preservation, clubs and events etc.
Help document every manufacturer model build, and record every machine in preservation, clubs and events etc.
-
Topic author - Posts: 15
- Joined: Fri Aug 20, 2010 5:06 pm
- Real name: Bill Holmes
- Has thanked: 1 time
Re: Rebuilding 10RB
Thank you all for the warm welcome and useful information.
Studying the various pictures and a video of the 10RB skimmer at Threlkeld it looks like the machine should be middle green with white(!) roof and window frames . The boom and truck frame should be the dark green (Lincoln?) as seen on later 10s and 22s. Interior should be cream, though the engine would soon be dirty and oil covered. ( Yes, I know it shouldn't leak oil) . Engine is currently grey/red oxide/black oil but it was taken out for major overhaul in 1959 so might have got a new paint scheme then.
Now, about those conical rollers..........
Bill
Studying the various pictures and a video of the 10RB skimmer at Threlkeld it looks like the machine should be middle green with white(!) roof and window frames . The boom and truck frame should be the dark green (Lincoln?) as seen on later 10s and 22s. Interior should be cream, though the engine would soon be dirty and oil covered. ( Yes, I know it shouldn't leak oil) . Engine is currently grey/red oxide/black oil but it was taken out for major overhaul in 1959 so might have got a new paint scheme then.
Now, about those conical rollers..........
Bill
Re: Rebuilding 10RB
f.p. mc cann of Knocklogrim co. derry have what i think is a restored rb 10 at the front of their yard which is painted green...i think the machine is restored though I never had a chance to get a nosey around it
Who is online
Users browsing this forum: No registered users and 5 guests