Come to use it today to find one of the control levers is stuck solid. It is the left hand control as you sit in the cab that controls the 360 slew and bucket arm in out. Left/right works fine to operate the slew but it absolutely will not move forward or back to control the bucket arm.
These pics show inside of the control lever joint and the arm that should slide up and down. Removed the screw from the joint but couldn't move the arm(I didn't want to try too hard though in case I made things worse).
![Image](http://www.classicmachinery.net/forum/images/userpix/65807_2Y28MBU0X72801610038162.jpg)
![Image](http://www.classicmachinery.net/forum/images/userpix/65807_2A54QWXLQ0N4O1610038163.jpg)
Any thoughts? I do remember having to tighten up the screw in that particular joint a few months ago as it had worked itself loose but never experienced this before.
Thankyou