the never again 1010
-
Topic author - Posts: 7
- Joined: Mon Aug 20, 2018 4:33 pm
- Location: Missouri Ozarks
- Has thanked: 2 times
- Been thanked: 4 times
- Flag:
the never again 1010
found some pics on an old flash drive
You do not have the required permissions to view the files attached to this post.
Cat D47U x 2, Allis Chalmers HD3
-
- Moderator
- Posts: 8705
- Joined: Sun Aug 05, 2007 8:36 pm
- Real name: Jeremy Rowland
- Has thanked: 1888 times
- Been thanked: 1705 times
Re: the never again 1010
Hi and welcome to CMN is that your dozer in the photos? Interesting looking piece of kit.
Jeremy
Jeremy
-
Topic author - Posts: 7
- Joined: Mon Aug 20, 2018 4:33 pm
- Location: Missouri Ozarks
- Has thanked: 2 times
- Been thanked: 4 times
- Flag:
Re: the never again 1010
I owned this 10 years ago or so, bought local with some ailments.
I wanted to make trails through our woods and play.
I had some guys work on the steering clutches and replace a cracked rear housing. The procedure to adjust the clutches was complex, a real PITA. One side was weak on drive but usable. It became extremely hard to start and eventually I blew it up putting in my driveway. Looking back, maybe I should have put a working temp gauge on it.
I grabbed ankle and sold it, swearing to never again own another old bulldozer.
But I didn't get my itch scratched and now own 2.
It had 3 point and PTO but somebody had torched the pto shaft inside the unit.
I wanted to make trails through our woods and play.
I had some guys work on the steering clutches and replace a cracked rear housing. The procedure to adjust the clutches was complex, a real PITA. One side was weak on drive but usable. It became extremely hard to start and eventually I blew it up putting in my driveway. Looking back, maybe I should have put a working temp gauge on it.
I grabbed ankle and sold it, swearing to never again own another old bulldozer.
But I didn't get my itch scratched and now own 2.
It had 3 point and PTO but somebody had torched the pto shaft inside the unit.
Cat D47U x 2, Allis Chalmers HD3
-
- Moderator
- Posts: 8705
- Joined: Sun Aug 05, 2007 8:36 pm
- Real name: Jeremy Rowland
- Has thanked: 1888 times
- Been thanked: 1705 times
Re: the never again 1010
nomorejohndeere wrote:I owned this 10 years ago or so, bought local with some ailments.
I wanted to make trails through our woods and play.
I had some guys work on the steering clutches and replace a cracked rear housing. The procedure to adjust the clutches was complex, a real PITA. One side was weak on drive but usable. It became extremely hard to start and eventually I blew it up putting in my driveway. Looking back, maybe I should have put a working temp gauge on it.
I grabbed ankle and sold it, swearing to never again own another old bulldozer.
But I didn't get my itch scratched and now own 2.
It had 3 point and PTO but somebody had torched the pto shaft inside the unit.
Well there you go so you now own two owning construction machinery is a very addictive hobby.
Jeremy
-
Topic author - Posts: 7
- Joined: Mon Aug 20, 2018 4:33 pm
- Location: Missouri Ozarks
- Has thanked: 2 times
- Been thanked: 4 times
- Flag:
-
Topic author - Posts: 7
- Joined: Mon Aug 20, 2018 4:33 pm
- Location: Missouri Ozarks
- Has thanked: 2 times
- Been thanked: 4 times
- Flag:
-
Topic author - Posts: 7
- Joined: Mon Aug 20, 2018 4:33 pm
- Location: Missouri Ozarks
- Has thanked: 2 times
- Been thanked: 4 times
- Flag:
-
Topic author - Posts: 7
- Joined: Mon Aug 20, 2018 4:33 pm
- Location: Missouri Ozarks
- Has thanked: 2 times
- Been thanked: 4 times
- Flag:
-
Topic author - Posts: 7
- Joined: Mon Aug 20, 2018 4:33 pm
- Location: Missouri Ozarks
- Has thanked: 2 times
- Been thanked: 4 times
- Flag:
Re: the never again 1010
I think I may have done it this time. a local machine working and worth keeping up.
Allis Chalmers HD3
Allis Chalmers HD3
Cat D47U x 2, Allis Chalmers HD3
Who is online
Users browsing this forum: No registered users and 11 guests