New owner of Hymac 580B
-
Topic author - Posts: 102
- Joined: Wed Nov 08, 2017 7:22 pm
- Real name: Håkan
- Has thanked: 46 times
- Been thanked: 26 times
- Flag:
Re: New owner of Hymac 580 B
Santa came early. Two heavy packets delivered to the door this morning!
You do not have the required permissions to view the files attached to this post.
-
Topic author - Posts: 102
- Joined: Wed Nov 08, 2017 7:22 pm
- Real name: Håkan
- Has thanked: 46 times
- Been thanked: 26 times
- Flag:
Re: New owner of Hymac 580 B
I really hate winter. 6 degrees below zero today
I manage to clean the gearbox today. But the mess in the bottom was frozen, so i had to defrost it with gas.
Filled up with new oil and bolted it with silicone and new screws.
Than i spent some time on the glide rails. They were pretty worn so i welded new flat bar on top of it.
Now i have to wait for the bearing to arrive before i can do anything more.
I manage to clean the gearbox today. But the mess in the bottom was frozen, so i had to defrost it with gas.
Filled up with new oil and bolted it with silicone and new screws.
Than i spent some time on the glide rails. They were pretty worn so i welded new flat bar on top of it.
Now i have to wait for the bearing to arrive before i can do anything more.
You do not have the required permissions to view the files attached to this post.
-
- Moderator
- Posts: 8705
- Joined: Sun Aug 05, 2007 8:36 pm
- Real name: Jeremy Rowland
- Has thanked: 1888 times
- Been thanked: 1704 times
-
Topic author - Posts: 102
- Joined: Wed Nov 08, 2017 7:22 pm
- Real name: Håkan
- Has thanked: 46 times
- Been thanked: 26 times
- Flag:
Re: New owner of Hymac 580 B
Rain rain rain. At least i dont have to freeze.
New bearing fitted. It was pretty tight to mount. But finally i made it.
New bearing fitted. It was pretty tight to mount. But finally i made it.
You do not have the required permissions to view the files attached to this post.
-
Topic author - Posts: 102
- Joined: Wed Nov 08, 2017 7:22 pm
- Real name: Håkan
- Has thanked: 46 times
- Been thanked: 26 times
- Flag:
Re: New owner of Hymac 580 B
New drive chain fitted. The old drive chain was pretty stretched out.
Old above in the picture
Old above in the picture
You do not have the required permissions to view the files attached to this post.
-
- Moderator
- Posts: 8705
- Joined: Sun Aug 05, 2007 8:36 pm
- Real name: Jeremy Rowland
- Has thanked: 1888 times
- Been thanked: 1704 times
-
Topic author - Posts: 102
- Joined: Wed Nov 08, 2017 7:22 pm
- Real name: Håkan
- Has thanked: 46 times
- Been thanked: 26 times
- Flag:
Re: New owner of Hymac 580 B
During the holiday i got time to put the tracks back on.
You do not have the required permissions to view the files attached to this post.
Who is online
Users browsing this forum: No registered users and 24 guests