Hi,
I have a problem with my JCB 3c mk2 I think it might be the injector pump, what's happening is it will not start again after it's been running. I think once the stop has been pulled there is something in the injector pump sticking, because when you go to start it again it will not fire, no smoke coming out of pipe. Has anyone got any ideas.
Thanks
Jcb
-
- Posts: 1004
- Joined: Sun Oct 21, 2012 11:14 pm
- Real name: Rob
- Location: Hampshire
- Has thanked: 206 times
- Been thanked: 284 times
- Flag:
Re: Jcb
A quick test would be to stall it instead of pulling the stop. If it restarts ok then that points to the stop lever as you suggest.
Another thought would be to try pushing the excess fuel button (if it has one) see if that has any effect.
Another thought would be to try pushing the excess fuel button (if it has one) see if that has any effect.
If a LandRover doesn't leak oil, it's run out.
-
- Posts: 689
- Joined: Sat Oct 03, 2009 8:49 pm
- Real name: William Mulholland
- Location: County Down
- Has thanked: 7 times
- Been thanked: 43 times
- Flag:
Re: Jcb
Which injector pump have you? Rotary or inline?
William
JCB Hydra Digger Loadall 65
JCB 3DIII Powertrain
JCB 3DIII (Manual)
JCB 3DII
JCB 3CIII
JCB 805B
JCB Hydra Digger Loadall 65
JCB 3DIII Powertrain
JCB 3DIII (Manual)
JCB 3DII
JCB 3CIII
JCB 805B
Who is online
Users browsing this forum: No registered users and 21 guests