Wonders will never cease; one bank holiday weekend later and after a bit of clearing out the Lathe and Mill have finally migrated from being under cover, but outside my workshop to inside:

But don't be fooled by the space inside from that first pic as this lot (less the non folding engine crane and Howard rotorvator - one of three,or two too many) had to go back in there:


...and not only is a major tidy up required:


I also need to rejig the layout to move this storage and do away with some of the workbench area to do that so there's enough room for full travel on the Mill

CMN Stuff: MF65, Thwaites Nimline, JCB 3CX
Projects: S11a 88" V8 Hybrid, 2 x S111 109"s, Mk11 Mini, Harrison L5A
Ish projects: T25 Camper, ST675R
Just added: Alpine S5 & Bridgeport Mk2
Sorely Missed: Impreza, E39 M5