jcb 3c compression test

Discuss loaders/backhoes here

Topic author
browuk
Posts: 18
Joined: Mon May 31, 2010 7:32 pm
Real name: Dave

jcb 3c compression test

Post #1 by browuk » Fri Apr 13, 2012 11:02 am

Hi all, can someone tell me what compression test kit I need to test on a jcb 3c II nuffield 4/65 engine.

never done a diesel test before but am I right in thinking I remove the injectors?

looking for a real cheapie kit that will do the job.

thanks


Julian
Posts: 481
Joined: Sun May 17, 2009 8:29 pm
Real name: Julian
Location: Warrington, UK
Been thanked: 13 times

Re: jcb 3c compression test

Post #2 by Julian » Fri Apr 13, 2012 12:10 pm

browuk wrote:Hi all, can someone tell me what compression test kit I need to test on a jcb 3c II nuffield 4/65 engine.

never done a diesel test before but am I right in thinking I remove the injectors?

looking for a real cheapie kit that will do the job.

thanks


I made a DIY one years ago to do a Peugeot. I just knocked the guts out of an old glow plug and coupled it to a cheap pressure gauge via a short length of rubber hose. It worked a treat - no max reading 'hold' facility but you can get by without.

If there's no glo plug holes then maybe you could adapt an old injector or use a BSP adaptor if they are a 'screw-in' type?

Julian.


Return to “Loaders/Backhoes”

Who is online

Users browsing this forum: No registered users and 23 guests