bodywork is in pretty bad shape and its sat for a few years but for a whole 80 notes I thought there was nothing to lose!
Its a Petter PH2, 2WD ,3 forward 1 reverse, manual tip.
It does have the cuts in the back plate the same as the Thwaite's dumpers but cant see any plates or stamps to verify this?
also about a foot either side of skip release handle are two forward facing "V" 's that seem to have no purpose?
The only thing that it seems to be missing is the handle but I will be making one on Monday to suit.
Today we tried to bump start it with the land rover which worked fine until the clutch return spring broke at the same time as the little one on the fuel rack!
which gave it full throttle in top gear!
![Insomnia :insomnia:](./images/smilies/icon_insomnia.gif)
it stopped when it hit the hedge, thankfully!!
![Dizzy :dizzy:](./images/smilies/icon_shocked.gif)
so after a bodge with some springs I had lying we tried it again and it runs fine but I'd like to get the proper spring for the fuel which according to the manual is part number 256311.
Does anyone know where I could get one or even anyone have one I could buy?. I've tried ebay and stationary engine parts but no luck
(attached and circled in red)
it also jumps out of reverse but I can live with that until its jobs finished and I can restore it a bit!
Video of it running HERE
https://youtu.be/XLMMMCy5Zg8