The Classic Machinery Network

Hi Greg.

If you are having any difficulties sourcing a bmc engine oil filter for your 3cx we should have some in stock.

Regards

Francis
FCSpares

Hi kerniki, Yes both for brakes & very important point by topkit don't use brake fluid.. You mentioned that you had steering trouble. If you don't want to start ripping everything apart you may want to start by cleaning the suction strainer that filters the oil flow to the power steering system ...

Hi Richard, Excellent advise from Pete & Jeremy.. If its any help to you I have dismantled alot of 3c's down the years & unlike alot of breakers I keep everything off them.. Should you decide to replace the steel pipe with an original I would have one off & ready to go. As the guys have ...

Hi Michael, Francis here from FCSpares.. If you soak with lots of WD40 & give it time they should eventually open. But make sure you use a tight fitting spanner or deep socket as to not round the corners. DON'T use heat!! You can give me a call if you wish & I will advise. You & your dad...

Hi Agrimax,
I had posted without seeing the later posts & pics

Re: liners very lucky usually a pain..

Mikerb: I'll try & see if I can Identify for you, from these numbers tomorrow.

H 37113010/1
22M75

Hi,

I have a good second hand water rad, should you require one. Also alot of buckets & other parts that you may require.

Hi,

I've got 2 complete king pin sets available

00353868768209

Hi, In my experience the Liners are extremely difficult to re-fit without getting them pressed in correctly. You will need to pop them into a freezer overnight & fit them immediately after coming out of freezer.. you should also use freeze spay & a decent pullers applying even pressure.. How...