Priestman Excavators

Discuss excavators here

Gavin Phillips
Posts: 447
Joined: Sat Oct 11, 2008 11:11 am
Real name: Gavin
Location: north east England, UK
Been thanked: 12 times
Contact:

Re: Priestman Excavators

Post #171 by Gavin Phillips » Sat Dec 08, 2012 7:23 pm

Hi Fred

Thanks for the machine ID and the other pictures. They should help me if/when more Priestman late model Mustang machines turn up on eBay/auction sites.

Was the 2-11 the only wheeled machine in the 2-1X series? My knowledge of the lineup of these Priestman excavators is very far from complete as you can probably tell.

Best regards

Gavin
Look out that window, Eden isn't burning. Its burnt.

User avatar

FOWLER MAN
Posts: 2358
Joined: Wed Dec 09, 2009 11:28 pm
Real name: fred evans
Has thanked: 1295 times
Been thanked: 1111 times
Flag: Wales

Re: Priestman Excavators

Post #172 by FOWLER MAN » Sat Dec 08, 2012 7:34 pm

Hi Gavin,
The 2-11 was the only duck in the 2 series.
Mine was one of only 6 built. Priestmans sign wrote it, took it to SED 1988 to demonstrate it and gave me a fair discount for the privelige.
Fred


Gavin Phillips
Posts: 447
Joined: Sat Oct 11, 2008 11:11 am
Real name: Gavin
Location: north east England, UK
Been thanked: 12 times
Contact:

Re: Priestman Excavators

Post #173 by Gavin Phillips » Sat Dec 08, 2012 7:37 pm

Wow so a rare piece of British history then? Even better to know at least some of these machines are kicking around even if it is as a scrap handler.

Thanks again.

Best regards

Gavin
Look out that window, Eden isn't burning. Its burnt.


shirtbox2003
Posts: 61
Joined: Fri Jun 08, 2012 7:59 pm
Real name: jack
Has thanked: 25 times
Been thanked: 7 times

Re: Priestman Excavators

Post #174 by shirtbox2003 » Fri Jan 18, 2013 2:07 pm

it is to give more uplift , probably because priestman had a large stock of short rams for smaller models,thus saving waste.regards john.

User avatar

FOWLER MAN
Posts: 2358
Joined: Wed Dec 09, 2009 11:28 pm
Real name: fred evans
Has thanked: 1295 times
Been thanked: 1111 times
Flag: Wales

Re: Priestman Excavators

Post #175 by FOWLER MAN » Sat Jan 19, 2013 6:40 pm

shirtbox2003 wrote:it is to give more uplift , probably because priestman had a large stock of short rams for smaller models,thus saving waste.regards john.


Hi,
I think your pretty wide of the mark if its the two peice boom you are refering to. :lol:
All Priestmans had been fitted with two peice 12 position booms prior to the 108s and 168s and "Two Series."
Rams were made for these machines, (120s,160s,220s). by Hamworthy Hydraulics.
The 108s and 168s used Italian made rams.
By the time the 2-15 which inherited its boom from the 120 was introduced, all rams were made in house by "Taylor Rams."(No old stock).
I beleive Taylors grew out of Taylor Cranes who were taken over by the "Coles Cranes, (Priestman), Group."

This boom was retained on the 2-15 because the geometry lent itself to the fitting of ditch cleaning extenstons and other equipment which had always been a large proportion of Priestman sales.
Not only did the design give more uplift as you say, but it gave increased reach and digging depth capabilities too.

The drawback was that the arm, at best, would not come in closer than 2m. from the track. Priestman overcame the problem by supplying a "Tuck Link". I had one on one of my 120s. This allowed the arm to bring the bucket right in to the track.
Fred
img308.jpg
Tuck Link.jpg
You do not have the required permissions to view the files attached to this post.


shirtbox2003
Posts: 61
Joined: Fri Jun 08, 2012 7:59 pm
Real name: jack
Has thanked: 25 times
Been thanked: 7 times

Re: Priestman Excavators

Post #176 by shirtbox2003 » Sat Jan 19, 2013 11:38 pm

i was just answering a question on an earlier topic regarding the reason for the tuck link which you agree with my answer to.this overcame the design fault in the original geometry and length of rams.as for the 12 point variable position boom,i have no issues with that.regards,jack.

User avatar

XS650
Posts: 1969
Joined: Fri Oct 17, 2008 3:22 pm
Real name: craig
Location: North Yorks
Has thanked: 153 times
Been thanked: 373 times
Flag: Great Britain

Re: Priestman Excavators

Post #177 by XS650 » Fri May 16, 2014 11:33 am

XS650 wrote:Spotted this yesterday in Middlesbrough , it's just completed extending a haulage yard , couldn't get a clear shot , no it's not an Eldiss Sirroco :D it's a Priestman Mustang !, next stop scrapyard maybe. Still clearly marked Wrights of York , always surprises me people leave their name on sold machines, unless they went bang of course.


Pleased to see this Priestman Mustang 2-15 is still in the yard 2 years later and not scrapped , seen today working on some road repairs .
Craig-
rrP1070828.JPG
You do not have the required permissions to view the files attached to this post.
Last edited by XS650 on Fri May 16, 2014 12:00 pm, edited 3 times in total.
Not all those who wander are lost.

User avatar

XS650
Posts: 1969
Joined: Fri Oct 17, 2008 3:22 pm
Real name: craig
Location: North Yorks
Has thanked: 153 times
Been thanked: 373 times
Flag: Great Britain

Re: Priestman Excavators

Post #178 by XS650 » Fri May 16, 2014 11:35 am

XS650 wrote:
XS650 wrote:Spotted this yesterday in Middlesbrough , it's just completed extending a haulage yard , couldn't get a clear shot , no it's not an Eldiss Sirroco :D it's a Priestman Mustang !, next stop scrapyard maybe. Still clearly marked Wrights of York , always surprises me people leave their name on sold machines, unless they went bang of course.

Pleased to see this is still in the yard and not scrapped and today it is working on some road repairs -
rrP1070828.JPG

............
Not all those who wander are lost.

User avatar

FOWLER MAN
Posts: 2358
Joined: Wed Dec 09, 2009 11:28 pm
Real name: fred evans
Has thanked: 1295 times
Been thanked: 1111 times
Flag: Wales

Re: Priestman Excavators

Post #179 by FOWLER MAN » Fri May 16, 2014 5:32 pm

Hi Craig,
I'm getting quite excited over that one. :lol: :lol: It's good to see one still out there. :thumbup: Wonder if its for sale :?: :?:

Here are a few more Priestman pics while I'm on here.
1173595_574652769243042_1956602772_n.jpg
1004096_566227376752248_1670615628_n.jpg
643946_566227203418932_1455998023_n.jpg
You do not have the required permissions to view the files attached to this post.


Gavin Phillips
Posts: 447
Joined: Sat Oct 11, 2008 11:11 am
Real name: Gavin
Location: north east England, UK
Been thanked: 12 times
Contact:

Re: Priestman Excavators

Post #180 by Gavin Phillips » Fri May 16, 2014 6:52 pm

Brilliant picture of the 2-15 there Craig, so that's two Priestman machines that still survive in the York area. The Wrights (now Wrights of Crockey Hill Ltd) still exist as a plant/skip/dump truck hire so they may well have some other goodies tucked away! Is the Priestman actually in their yard or is it elsewhere?
Look out that window, Eden isn't burning. Its burnt.


Return to “Excavators”

Who is online

Users browsing this forum: No registered users and 11 guests