I have searched this Forum but can't find what I am looking for. I need a parts manual for a 1992 Project 8 3CX Site Master. Are they available for downloading anywhere please ?
TIA.
Parts manual.
-
- Posts: 542
- Joined: Sat Oct 30, 2010 8:27 pm
- Real name: Mark Rive
- Location: Guernsey
- Has thanked: 33 times
- Been thanked: 26 times
Re: Parts manual.
Hi, cant send you the manual but if you let me know your serial number and what you're after I'll post the pages with diagrams and part numbers. Mark
-
Topic author - Posts: 288
- Joined: Wed Sep 17, 2008 1:29 am
- Real name: DGL
- Location: Warwickshire
- Has thanked: 17 times
- Been thanked: 7 times
- Flag:
Re: Parts manual.
Mark.Rive wrote:Hi, cant send you the manual but if you let me know your serial number and what you're after I'll post the pages with diagrams and part numbers. Mark
Crikey Mark, that would be helpful. I just wanted to make sure that I was ordering the correct near side door catch for my 1992 Project 8. The machine serial no. is 412628.
Thanks a bunch - David.
Six up front .............................means plenty of grunt.
-
- Posts: 542
- Joined: Sat Oct 30, 2010 8:27 pm
- Real name: Mark Rive
- Location: Guernsey
- Has thanked: 33 times
- Been thanked: 26 times
Re: Parts manual.
Hi David, never realised that there were so many different doors on a 3CX Anyway this is the one that sits in your serial number break. If its not right let me know and I'll hunt out the next one Mark
You do not have the required permissions to view the files attached to this post.
-
Topic author - Posts: 288
- Joined: Wed Sep 17, 2008 1:29 am
- Real name: DGL
- Location: Warwickshire
- Has thanked: 17 times
- Been thanked: 7 times
- Flag:
Re: Parts manual.
Mark.Rive wrote:Hi David, never realised that there were so many different doors on a 3CX Anyway this is the one that sits in your serial number break. If its not right let me know and I'll hunt out the next one Mark
Many thanks Mark, that is the right one. You're a star. Will order one from DiggerParts tomorrow. Then I will be able to do away with the piece of wire.
Six up front .............................means plenty of grunt.
-
Topic author - Posts: 288
- Joined: Wed Sep 17, 2008 1:29 am
- Real name: DGL
- Location: Warwickshire
- Has thanked: 17 times
- Been thanked: 7 times
- Flag:
Re: Parts manual.
Mark.Rive wrote:Glad to be of service Best keep the wire for the other side
Never use the other side Mark. Got too much clutter there. Shovel, fork, slash hook. tamper, lunch, blah di blah.
Q: Do you know my definition of a good digger driver ?
A: One who knows when to get off his backside and use a bloody shovel.
Thanks again Mark. All sorted now.
Six up front .............................means plenty of grunt.
Who is online
Users browsing this forum: No registered users and 21 guests