I am new to this forum, so please go easy on me, am not expert on these things. Figured here was a good place to find some info on the old beast on our farm. We have an old Case 850 dozer, non-runner. Doesn't look very pretty and is taking up too much room. Was bought as a non-runner years ago as a project and has never been touched (due to too many other projects!)
Where would you recommend advertising such a machine? How am I best to work out an approximate valuation?
Many thanks in advance for any help
Case 850- vintage
-
Topic author - Posts: 4
- Joined: Thu May 07, 2015 11:29 am
- Real name: Joe
-
Topic author - Posts: 4
- Joined: Thu May 07, 2015 11:29 am
- Real name: Joe
Re: Case 850- vintage
Apparently it is a 60s/70s model. Injectors and starter motors missing. Don't know much else sadly. Is that any help?
-
- Posts: 2358
- Joined: Wed Dec 09, 2009 11:28 pm
- Real name: fred evans
- Has thanked: 1295 times
- Been thanked: 1111 times
- Flag:
Re: Case 850- vintage
Hi Joe,
If I was bying your machine to restore, taking into account the probable cost and possible difficulty in obtaining replacement parts, I would sadly expect to pay little more than scrap value.
An engine that has stood long term without injectors could be problematic.
The real value hinges on the condition of the running gear. That is always expensive to replace, and may allong with other items, be sought after for another machine.
Fred
If I was bying your machine to restore, taking into account the probable cost and possible difficulty in obtaining replacement parts, I would sadly expect to pay little more than scrap value.
An engine that has stood long term without injectors could be problematic.
The real value hinges on the condition of the running gear. That is always expensive to replace, and may allong with other items, be sought after for another machine.
Fred
-
Topic author - Posts: 4
- Joined: Thu May 07, 2015 11:29 am
- Real name: Joe
Re: Case 850- vintage
Hi Fred
thank you for the reply. I would prefer the machine to either be restored or go for parts, the last thing i want is for it just to be melted down. What would 'scrap value' on a machine like this likely be approximately?
Thanks
thank you for the reply. I would prefer the machine to either be restored or go for parts, the last thing i want is for it just to be melted down. What would 'scrap value' on a machine like this likely be approximately?
Thanks
-
- Posts: 1007
- Joined: Mon May 06, 2013 11:02 am
- Real name: Paul Griffiths
- Has thanked: 384 times
- Been thanked: 256 times
- Flag:
Re: Case 850- vintage
Welcome Joe
Scrap value wouldnt be high as scrap prices are quite low at the moment as the world ecomey is in a slump these days
As to where to advertise I guess it would depend on what part of the world your if you were in Australia the machine would be worth than if you were in the UK or the US
Depending on how brave you feel it might be worth spending a few weeks trying to get it back together and going because as it sits any buyer can only assume that nothing is working at all
Paul
Scrap value wouldnt be high as scrap prices are quite low at the moment as the world ecomey is in a slump these days
As to where to advertise I guess it would depend on what part of the world your if you were in Australia the machine would be worth than if you were in the UK or the US
Depending on how brave you feel it might be worth spending a few weeks trying to get it back together and going because as it sits any buyer can only assume that nothing is working at all
Paul
Your better to die trying than live on your knees begging
-
Topic author - Posts: 4
- Joined: Thu May 07, 2015 11:29 am
- Real name: Joe
Who is online
Users browsing this forum: No registered users and 22 guests