Lancer boss forklift- park brake

Discuss fork lifts here

Topic author
geochushi
Posts: 1
Joined: Tue Jul 20, 2021 3:15 am
Real name: George Chushi
Flag: Zambia

Lancer boss forklift- park brake

Post #1 by geochushi » Tue Jul 20, 2021 8:34 am

Hi, I have a Lancer boss forklift that had been lying around the yard for a while. Managed to work on the engine but I cannot get the park brake to work. All the brake liners are fine and cleaned, however, the hand brake cable is there but is slack, I have no idea of how to get some tension on it as all the movement when I pull the lever does translate into movement to the liners. There could be a missing bracket but I have no idea what it looks like.
You do not have the required permissions to view the files attached to this post.
Last edited by geochushi on Wed Jul 21, 2021 11:51 am, edited 1 time in total.


Jeremy Rowland
Moderator
Posts: 8150
Joined: Sun Aug 05, 2007 8:36 pm
Real name: Jeremy Rowland
Has thanked: 1587 times
Been thanked: 1470 times

Re: Lancer boss forklift- park brake

Post #2 by Jeremy Rowland » Tue Jul 20, 2021 7:46 pm

Hi George and welcome :wave: perhaps if you could post some photos of the linkage system somebody on here may be able to spot anywhere that you may be able to adjust the cable, under normal circumstances there would be a way to carry out adjustment.

Jeremy


Return to “Fork Lifts”

Who is online

Users browsing this forum: No registered users and 1 guest