Welcome to the new version of CMN!
Some help showing the new functions How-To

How-to: Browsing the forum effectively

Manitou 4RM26PC Operators Manual

Discuss fork lifts here

Topic author
Jonm
Posts: 14
Joined: Fri Jun 16, 2017 8:16 am
Real name: Jon Mabbett
Has thanked: 6 times
Flag: Great Britain

Manitou 4RM26PC Operators Manual

Post #1 by Jonm » Wed Jul 19, 2017 12:33 am

I have just purchased a Manitou 4RM26PC. It is a rough terrain forklift. I am looking for an operators manual, basically I want to give the machine a service. I have looked on the internet and found a load of manuals on hawkins website http://www.hawkinsequipment.com/owners- ... or-manuals
But it does not have the one for my machine.

There are other websites which claim to have the manual but want credit card details which puts me off, I do not mind paying but these could be scam/rip off sites.

My question is, does anyone know where I can get an operators manual.

Many thanks, jon


Topic author
Jonm
Posts: 14
Joined: Fri Jun 16, 2017 8:16 am
Real name: Jon Mabbett
Has thanked: 6 times
Flag: Great Britain

Re: Manitou 4RM26PC Operators Manual

Post #2 by Jonm » Wed Jul 19, 2017 1:07 am

Image

This is a picture of the forklift, not sure of date, probably 1980's


kipme
Posts: 18
Joined: Tue Apr 04, 2017 7:24 pm
Has thanked: 4 times
Been thanked: 4 times
Flag: Netherlands

Re: Manitou 4RM26PC Operators Manual

Post #3 by kipme » Mon Jul 31, 2017 10:44 pm

you have a sn for this machine? if so i normally should be able to help you out there


Topic author
Jonm
Posts: 14
Joined: Fri Jun 16, 2017 8:16 am
Real name: Jon Mabbett
Has thanked: 6 times
Flag: Great Britain

Re: Manitou 4RM26PC Operators Manual

Post #4 by Jonm » Mon Jul 31, 2017 11:17 pm

Kipme
The numbers I have are
Type 4RM26PC
Serial Number 70877
Chassis Number 170377

Many thanks for the response
Regards Jon


kipme
Posts: 18
Joined: Tue Apr 04, 2017 7:24 pm
Has thanked: 4 times
Been thanked: 4 times
Flag: Netherlands

Re: Manitou 4RM26PC Operators Manual

Post #5 by kipme » Tue Aug 01, 2017 7:51 am

Hey Jonm,
Sorry only a part manual
the machine left factory 04.30.1986


Topic author
Jonm
Posts: 14
Joined: Fri Jun 16, 2017 8:16 am
Real name: Jon Mabbett
Has thanked: 6 times
Flag: Great Britain

Re: Manitou 4RM26PC Operators Manual

Post #6 by Jonm » Tue Aug 01, 2017 8:51 am

Kipme, Thankyou for the information and for looking it up.

Is there anyone else who can help?


longreach1976
Posts: 6
Joined: Sat Aug 26, 2017 12:13 pm
Real name: John Welford
Been thanked: 1 time
Flag: Great Britain

Re: Manitou 4RM26PC Operators Manual

Post #7 by longreach1976 » Wed Sep 20, 2017 10:31 am

Hi I don't have manual most of rough terrain like that are about 2.5 or 3 ton I've just done a clutch on a 1988 Coventry climax 2.5 looks like yours what is it you want to know


Topic author
Jonm
Posts: 14
Joined: Fri Jun 16, 2017 8:16 am
Real name: Jon Mabbett
Has thanked: 6 times
Flag: Great Britain

Re: Manitou 4RM26PC Operators Manual

Post #8 by Jonm » Wed Sep 20, 2017 11:25 am

John
Thankyou for the reply. Basically I would like to give the forklift a service, so it is a case of finding out what needs doing, type of oils to use etc.
Regards, Jon


Return to “Fork Lifts”

Who is online

Users browsing this forum: No registered users and 1 guest