The Classic Machinery Network

Hi all,

I'm new to the forum (so please excuse any lack of correct etiquette) however i thought this might be the ideal place for some help...

I am currently assisting in a rebuild of a JCB 3C Mk 2 from the 1970's and need to order parts (...many parts!)

I was hoping someone here might be able to share with me a parts/workshop manual for the JCB 3C Mk 2, to assist me? (I already have the operator handbook - thanks to this forum! Much appreciated)

I look forward to any responses.

Thanks!

Hi Dominic and welcome to CMN somebody on here will be able to offer you advice on parts; for good used parts Warwick Ward is but one name that springs easily to mind but there are others, some parts may be off the shelf from JCB but are likely to cost an arm and leg, other CMN members will be able to point you in the right direction.

Jeremy

You cold also try Simon Vicary just google Vicary JCB spares, also try Jakespare he is not always easy to get hold of. also Eric Warburton, Lastly but not least Rusty Parts up in Yorkshire he is very helpfull.

Welcome to CMN Dominic!
Search for 3c in downloads, there are a few different files that could be of interest for you?