JCB 3C Mk 2 parts/workshop manual

Discuss workshop equipment here

Topic author
Posts: 1
Joined: Tue Aug 21, 2018 10:39 pm
Real name: Dominic Linton
Flag: Great Britain

JCB 3C Mk 2 parts/workshop manual

Post #1 by Dominic87 » Wed Aug 22, 2018 4:10 pm

Hi all,

I'm new to the forum (so please excuse any lack of correct etiquette) however i thought this might be the ideal place for some help...

I am currently assisting in a rebuild of a JCB 3C Mk 2 from the 1970's and need to order parts (...many parts!)

I was hoping someone here might be able to share with me a parts/workshop manual for the JCB 3C Mk 2, to assist me? (I already have the operator handbook - thanks to this forum! Much appreciated)

I look forward to any responses.


Jeremy Rowland
Posts: 7104
Joined: Sun Aug 05, 2007 8:36 pm
Real name: Jeremy Rowland
Has thanked: 1141 times
Been thanked: 950 times

Re: JCB 3C Mk 2 parts/workshop manual

Post #2 by Jeremy Rowland » Thu Aug 23, 2018 9:32 pm

Hi Dominic and welcome to CMN :wave: somebody on here will be able to offer you advice on parts; for good used parts Warwick Ward is but one name that springs easily to mind but there are others, some parts may be off the shelf from JCB but are likely to cost an arm and leg, other CMN members will be able to point you in the right direction.


Return to “Workshop equipment/tools”

Who is online

Users browsing this forum: No registered users and 1 guest