Found this interesting, pity there is not a commentary :https://www.youtube.com/watch?v=EEY2lx5ALxY
The Atkinson (Gauardsman I believe) was a bit modern looking for Atkinson!
The Leyland Ergomatic cab must have seen must have seemed revolutionary when you think the Ford stand still had the 50s Trader. The seats in the ,s old Leyland were a bit more comfy looking than Dad's old Mercury.
Pathe 1964 Commercial Motor Show
-
- Moderator
- Posts: 8690
- Joined: Sun Aug 05, 2007 8:36 pm
- Real name: Jeremy Rowland
- Has thanked: 1882 times
- Been thanked: 1695 times
Re: Pathe 1964 Commercial Motor Show
Nice one Pete I think the Atki Guardsman had a steel cab if memory serves me correctly.
Jeremy
Jeremy
-
- Posts: 998
- Joined: Sun Oct 21, 2012 11:14 pm
- Real name: Rob
- Location: Hampshire
- Has thanked: 200 times
- Been thanked: 281 times
- Flag:
Re: Pathe 1964 Commercial Motor Show
We had a Lynx tipper with an ergomatic cab, 'G' reg I think. I was absolutely certain that the cab didn't tilt and access was via the engine cover in the cab. It was so unreliable it didn't last a year with us and for the amount of times it had fitters crawling all over it I don't ever recall seeing the cab tilted.
If a LandRover doesn't leak oil, it's run out.
-
- Posts: 2358
- Joined: Wed Dec 09, 2009 11:28 pm
- Real name: fred evans
- Has thanked: 1295 times
- Been thanked: 1111 times
- Flag:
Re: Pathe 1964 Commercial Motor Show
hair bear wrote:We had a Lynx tipper with an ergomatic cab, 'G' reg I think. I was absolutely certain that the cab didn't tilt and access was via the engine cover in the cab. It was so unreliable it didn't last a year with us and for the amount of times it had fitters crawling all over it I don't ever recall seeing the cab tilted.
Hi Rob,
I ran some Leyland Octopus tippers and a Bison, all with Ergo cabs and I can assure you they were tilt cabs and access to the engine was easy.
Fred
-
Topic author - Posts: 4081
- Joined: Fri Jul 13, 2007 12:43 am
- Real name: essexpete
- Has thanked: 853 times
- Been thanked: 692 times
Re: Pathe 1964 Commercial Motor Show
There were a few levels or standards with the Ergo cab from what I have read. A few were sent out as non tilt. Some cabs were so called deluxe and had more fitments and apparently a double skin for better insulation in parts of the cab. Then later on there was the High Datum cab.
-
- Posts: 1977
- Joined: Fri Oct 17, 2008 3:22 pm
- Real name: craig
- Location: North Yorks
- Has thanked: 156 times
- Been thanked: 374 times
- Flag:
Re: Pathe 1964 Commercial Motor Show
Dunno what Ergo's were like to use but they must have looked very modern back then as they still do not look that dated today 56 years later.IMHO
Not all those who wander are lost.
-
Topic author - Posts: 4081
- Joined: Fri Jul 13, 2007 12:43 am
- Real name: essexpete
- Has thanked: 853 times
- Been thanked: 692 times
Re: Pathe 1964 Commercial Motor Show
I am not a driver but I did spend some time in an Ergo as a school boy. There were many good things about the cab in the mid 60s when it was introduced but it was not quite a modern as the Ford D series or Dodge tilt cab. The engine cover was very intrusive, possibly due to most of the engines being considerably larger than the Ford and Dodge. (Ford of course tilted the engines slightly and both used V8s for more hp) The AEC Mercury that Dad ran from 69 to 73 was a cracking truck pound for pound.
As the cab aged, like many pressed steel designs from the 60s and 70s, they rusted heavily.
As the cab aged, like many pressed steel designs from the 60s and 70s, they rusted heavily.
Who is online
Users browsing this forum: No registered users and 3 guests