Hello all,
I have a JCB 805BT, a dumper ( no idea what it is yet and a Yanmar YB301-2.
I am hoping someone can help as I need a manual for both and seals for the boom ( the big cylinder on the top ) I think I have found a supplier for the JCB seals but I am struggling for the Yanmar. Any help would be appreciated, as I get the old girls moving I will post pics and will obviously be asking for lots of advice
Thanks in advance
Andy
Yanmar YB301-2
-
Topic author - Posts: 3
- Joined: Thu Nov 03, 2016 1:24 am
- Real name: andy waller
- Has thanked: 1 time
- Flag:
-
- Moderator
- Posts: 8689
- Joined: Sun Aug 05, 2007 8:36 pm
- Real name: Jeremy Rowland
- Has thanked: 1881 times
- Been thanked: 1695 times
Re: Yanmar YB301-2
Hi Andy and welcome I would suspect that seals can be obtained from a bearing/drives supplier unless they are a special size; other CMN members may be able to offer you some more specific advice.
Jeremy
Jeremy
-
- Posts: 2
- Joined: Wed Mar 24, 2021 4:54 pm
- Real name: joe joxton
- Flag:
Re: Yanmar YB301-2
luciousesox wrote:Hello all,
I have a JCB 805BT, a dumper ( no idea what it is yet and a Yanmar YB301-2.
I am hoping someone can help as I need a manual for both and seals for the boom ( the big cylinder on the top ) I think I have found a supplier for the JCB seals but I am struggling for the Yanmar. Any help would be appreciated, as I get the old girls moving I will post pics and will obviously be asking for lots of advice
Thanks in advance
Andy
They are very fast in supply and their prices are good. https://originalparts4you.com/yanmar
-
- Posts: 505
- Joined: Wed Aug 19, 2020 10:32 pm
- Real name: Tim
- Has thanked: 191 times
- Been thanked: 117 times
- Flag:
Re: Yanmar YB301-2
The Yanmar YB201 we had been borrowing needed two of the rams rebuilding last summer and they were quite a strange arrangement that no one appeared to have parts for, the chaps I took them to for a rebuild had to have custom seals made (which wasn't hugely more expensive than if they had been stock size). Each ram cost about £150+VAT to get rebuilt including a hone of the cylinders and all the parts including the custom made seals. If you're anywhere near Kent I can give you the contact details of the people we used.
CMN Stuff: MF65, Thwaites Nimline, JCB 3CX
Projects: S11a 88" V8 Hybrid, 2 x S111 109"s, Mk11 Mini, Harrison L5A
Ish projects: T25 Camper, ST675R
Just added: Alpine S5 & Bridgeport Mk2
Sorely Missed: Impreza, E39 M5
Projects: S11a 88" V8 Hybrid, 2 x S111 109"s, Mk11 Mini, Harrison L5A
Ish projects: T25 Camper, ST675R
Just added: Alpine S5 & Bridgeport Mk2
Sorely Missed: Impreza, E39 M5
Return to “Contacts for spares and services”
Who is online
Users browsing this forum: No registered users and 3 guests