Prefered engine rebuild kit?

Talk about technical issues here. Questions and answers!

Topic author
adg
Posts: 40
Joined: Wed Nov 11, 2009 12:44 pm
Real name: Alistair
Location: Lampeter, Wales
Has thanked: 9 times
Been thanked: 6 times
Flag: Wales

Prefered engine rebuild kit?

Post #1 by adg » Tue Nov 03, 2015 3:45 pm

I was wondering if there was a major difference in rebuild kit quality and/or if anyone has good/bad experience in the past?

I have a tired FE35 that requires an engine rebuild, the extent of the rebuild is not yet known, but given the amount of blow-by I'm expecting to replace/service:

Liners + pistons
bottom end bearings
valve guides + valves (perhaps just check and regrind)
timing chain + tensioner
oil pump

But until I open it up, I won't know for sure..

Also on the list:

Starter rebuild
Rubber hoses
Tidy electrics (all work but needs tlc)
front valance
rear wings
and a coat of paint (perhaps)

I will spill time the pump and open out the combustion hole too, to aid starting. I might consider having the head drilled for heater plugs..


Cheers

Al


Stormin
Posts: 258
Joined: Sat Sep 05, 2009 9:44 pm
Real name: Norman
Has thanked: 2 times
Been thanked: 15 times
Flag: Great Britain

Re: Prefered engine rebuild kit?

Post #2 by Stormin » Thu Nov 05, 2015 2:38 pm

I got my engine kit for my David Brown 990 from Emmark in Leeds. My engine machining man commented on the good quality of the parts.

My friend has a few 35's four cylinders I'll ask him where he got engine kits for his from, I've a feeling it may have been agriline but could be mistaken.
He has a couple of four cylinder heads not fitted which have the heater plug holes. He is also equipped to machine your own head to match if necessary.


Return to “Tech Talk”

Who is online

Users browsing this forum: No registered users and 1 guest