PARKER 3T drum bearing lubrication ?

taurus MK1 · Post #1 by **taurus MK1** » Sat Feb 22, 2014 7:02 pm

wondering the correct way to lube drum bearing on this little old reliable mixer, do I access through cover plate inside the drum ?

Cheers John :rockon:

FOWLER MAN · Post #2 by **FOWLER MAN** » Sat Feb 22, 2014 7:38 pm

taurus MK1 wrote::wave: wondering the correct way to lube drum bearing on this little old reliable mixer, do I access through cover plate inside the drum ?

Cheers John

Hi John,
Should be a grease nipple on the drumshaft.
Fred

taurus MK1 · Post #3 by **taurus MK1** » Sat Feb 22, 2014 7:42 pm

Hi Fred thanks for that, I will have a closer look tomorrow, thinking greaser might be gone !!! I will let you know.

Cheers John :rockon:

taurus MK1 · Post #4 by **taurus MK1** » Mon Feb 24, 2014 9:26 pm

Hi Fred, I looked but could not find ? I had the cover plate off inside the drum and regreased but only a little, all other grease points on the machine have filled greased caps which I have cleaned out and refilled,they are all working, but I cant see anything for drum support shaft, I could be dumb :dizzy:

Cheers John :rockon:

The Classic Machinery Network