JCB 3C3 hydraulic hose blanks

Discuss loaders/backhoes here

Topic author
Wiggybum
Posts: 14
Joined: Mon Jun 10, 2013 9:16 pm
Real name: Tom
Been thanked: 1 time

Re: JCB 3C3 hydraulic hose blanks

Post #11 by Wiggybum » Wed Jul 03, 2013 6:33 pm

Cheers Julian. I poured another 25 litre drum in just now and the level is 1" below the "LOW" level. As far as this JCB is concerned - that'll do! To be fair, it wasn't level when I measured the first time, so 10 litres on top of your estimate is fine.


18 stoner
Posts: 3
Joined: Sat Jul 26, 2014 8:01 pm
Real name: Pete
Has thanked: 1 time
Flag: Great Britain

Re: JCB 3C3 hydraulic hose blanks

Post #12 by 18 stoner » Sat Apr 30, 2016 6:24 pm

Ok, this is reviving an old thread but I'm currently going through this.
My problem is, on removal of the tank plate there seems to be no strainer!
The symptoms on my machine were juddering/noisey hydraulics especially when cold, steering the same. One thing I'm now thinking is could it simply be low oil level as there was only a measly 40 litres came out?

Any info would be appreciated. Pete.


18 stoner
Posts: 3
Joined: Sat Jul 26, 2014 8:01 pm
Real name: Pete
Has thanked: 1 time
Flag: Great Britain

Re: JCB 3C3 hydraulic hose blanks

Post #13 by 18 stoner » Sat Apr 30, 2016 6:31 pm

This is what I have looking upwards into the tank after plate removal:


Image


Return to “Loaders/Backhoes”

Who is online

Users browsing this forum: No registered users and 14 guests