Jcb 3cx advice

[The Jannie]

Hi all new to forum 65 year old in Scottish kid on Highlands just bought a 1984 3cx s/n 3cx-4/307157 p/s in very good condition except looking for supplier for 6 bolt fuel tank sender,speedo/taco cable any help would be gratefull also a manual have got to trace electrical fault in lighting circuit and new seal for glass door will be dropping in a bit for help as i develop thanks

JimL

[grant]

Have you tried scot jcb in Aberdeen for parts they should be able to get parts for your machine

[The Jannie]

Hi Grant thanks for name and due to health reasons i will be into Aberdeen on a few visits hence two birds etc spent most of last two days tracing wires p/o has disconnected for some reason but will get everything electrical working in the end thanks again

[Stormin]

Hi all new to forum 65 year old in Scottish kid on Highlands just bought a 1984 3cx s/n 3cx-4/307157 p/s in very good condition except looking for supplier for 6 bolt fuel tank sender,

JimL

Fuel tank sender should just be a generic part, replaceable with aftermarket as in Land Rover or similar.

http://www.ebay.co.uk/itm/LAND-ROVER-SERIES-3-2-DIESEL-FUEL-TANK-LEVEL-SENDER-UNIT-/370592232664?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item564904b4d8

http://www.ebay.co.uk/itm/MGB-Roadster-MGBGT-Genuine-Smiths-Fuel-Tank-Sender-MG-part-AHU1027-/200844837141?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item2ec3490115

Just bend or shorten the float hanger wire to suit depth of tank.

Obviously a genuine JCB part will save a bit of trouble but if they're expensive or unobtainable there are options.