Whitlock hydraulic pump
-
Topic author - Posts: 5
- Joined: Thu Aug 12, 2010 4:21 pm
- Real name: Bernard
Whitlock hydraulic pump
I have just bought an old Whitlock digger , think its 1965 using a Ford 4000 diesel tractor , dont know where to start on it or maybe approach should be to repair things as they break ? The digger would probably have been going to the scrap yard so its well worn . Main concern is the hydraulic pump (powering the front loader and back actor) seems to be making a noise , it not anything like as loud as the engine but I can hear it whining and thinking it may be about to give up. Have topped up with 46 oil , the digger works ok . The pump is mounted on the front bumper area and has part number S022200301 on the right hand end . I have been able to get a 'shop manual' for the Ford 4000 tractor but nothing on the Whitlock conversion , does anyone have an exploding diagram of the hydraulic pump on one of these ?
-
- Moderator
- Posts: 8677
- Joined: Sun Aug 05, 2007 8:36 pm
- Real name: Jeremy Rowland
- Has thanked: 1873 times
- Been thanked: 1692 times
Re: Whitlock hydraulic pump
Hi Bernard welcome to CMN, the pump will be a gear pump and sounds like it may well be shot.
If you need it repairing I can recommend somebody so pm me.
Jeremy
If you need it repairing I can recommend somebody so pm me.
Jeremy
-
Topic author - Posts: 5
- Joined: Thu Aug 12, 2010 4:21 pm
- Real name: Bernard
Re: Whitlock hydraulic pump
Jeremy , thanks pm sent .
Pete , thanks for the advice , there is a large approx 3L capacity filter on the high pressure side of the hydraulic pump , will check through the pipes for any more .
Bernard
Pete , thanks for the advice , there is a large approx 3L capacity filter on the high pressure side of the hydraulic pump , will check through the pipes for any more .
Bernard
-
- Posts: 276
- Joined: Sun Nov 16, 2008 11:58 am
- Real name: Nick
- Has thanked: 41 times
- Been thanked: 10 times
- Flag:
Re: Whitlock hydraulic pump
As essexpete said, check the suction side of the pump. May have a gauze filter in the tank on the outlet to the pump. Had a JCB 818 that was cavitating badly, on closer inspection the filter in the hydraulic tank was so choked it was starving the pump of oil, and the suction hose (from tank to pump) had collapsed. Clean filter, and new hose, it was a different machine.
-
Topic author - Posts: 5
- Joined: Thu Aug 12, 2010 4:21 pm
- Real name: Bernard
Re: Whitlock hydraulic pump
Craig , heres a photo , whoever painted it blue did a very thorough job , they even painted the inside surface of the gauze filter in the hydraulic oil reservoir ( goes at least three inches down the tube ) ,even I know that was not very clever of them .
Nick , yes its cavitating , there is no filter on the outlet from the reservoir tank to the pump inlet so I am planning to replace the main filter thats the first thing the pump feeds to on the high pressure side , dont know if this will help as the cavitation is definitely happening on the inlet to the pump .
Nick , yes its cavitating , there is no filter on the outlet from the reservoir tank to the pump inlet so I am planning to replace the main filter thats the first thing the pump feeds to on the high pressure side , dont know if this will help as the cavitation is definitely happening on the inlet to the pump .
You do not have the required permissions to view the files attached to this post.
-
- Posts: 1976
- Joined: Fri Oct 17, 2008 3:22 pm
- Real name: craig
- Location: North Yorks
- Has thanked: 156 times
- Been thanked: 374 times
- Flag:
Re: Whitlock hydraulic pump
Nice shade of blue looks like a 308
You do not have the required permissions to view the files attached to this post.
Not all those who wander are lost.
-
Topic author - Posts: 5
- Joined: Thu Aug 12, 2010 4:21 pm
- Real name: Bernard
Re: Whitlock hydraulic pump
Thanks for that Craig , its definitely the same profile and looks like the original colour should have been yellow , so its a model 308 .
-
- Posts: 1976
- Joined: Fri Oct 17, 2008 3:22 pm
- Real name: craig
- Location: North Yorks
- Has thanked: 156 times
- Been thanked: 374 times
- Flag:
Re: Whitlock hydraulic pump
Hi Bernard, their model numbering has always seemed a bit complex, but I think the very similar looking 105 was based on the Ford 3000 .
I will dig out and post the reverse of the 308 brochure which has some spec. on
I will dig out and post the reverse of the 308 brochure which has some spec. on
Not all those who wander are lost.
Who is online
Users browsing this forum: No registered users and 44 guests