JCB 3CX Back hoe not slewing left/right
-
- Posts: 36
- Joined: Tue Dec 19, 2017 7:53 pm
- Real name: Gethin Davies
- Has thanked: 8 times
- Been thanked: 1 time
- Flag:
Re: JCB 3CX Back hoe not slewing left/right
Thanks for the picture showing the procedure. I will try that tomorrow. the only thing was I found the padlock leaver not to be very responsive?? I'll let you know tomorrow if I succeed.
-
- Posts: 806
- Joined: Mon Sep 22, 2008 11:55 pm
- Real name: David
- Location: KENT
- Has thanked: 76 times
- Been thanked: 179 times
- Flag:
Re: JCB 3CX Back hoe not slewing left/right
You wont feel much with the leaver all it is doing is letting the pressure off from the four hydraulic clamps that hold the kingpost in place, The are the four round pots two at the top and two at the bottomof the kingpost corners, once the pressure is released then the kingpost will move.
-
- Posts: 36
- Joined: Tue Dec 19, 2017 7:53 pm
- Real name: Gethin Davies
- Has thanked: 8 times
- Been thanked: 1 time
- Flag:
Re: JCB 3CX Back hoe not slewing left/right
topkit wrote:You wont feel much with the leaver all it is doing is letting the pressure off from the four hydraulic clamps that hold the kingpost in place, The are the four round pots two at the top and two at the bottomof the kingpost corners, once the pressure is released then the kingpost will move.
Did as you suggested today and it worked perfect thanks for your help
Who is online
Users browsing this forum: No registered users and 47 guests