parts catalog for backhoe MF50B

[rob99]

I'm trying to rebuild my mf50b backhoe with a4.236 engine. I guess it's mk2. Would anyone share a parts book for this digger? Anything would be very useful.

[essexpete]

Is this any use?

https://www.ebay.co.uk/itm/114618712396

[rob99]

Unfortunately not. I boutght t but this is 1973 release for an older version of MF50. It does not cover an engine 4.236 and other modificatons.

[gecko.cx]

It does not cover an engine 4.236 and other modificatons.

"other modifications" are a bit of a problem, but the 4.236 is easy - start with an MF65 manual or Perkins manuals.

[agrimax]

But the 65 didn't have a 4.236...
Can't help with the 50B manual but there's a Perkins manual in the forum downloads section.

[rob99]

The biggest issue is an accurate parts list. I have collected some docs however they apply to older model and miss couple pages. The same applies to 4.236 There were couple versions of that engine. MF50B was a very succeessful loader for some reason it's very difficult to get the manuals.

[Holger]

Maybe this?
https://www.agrimanuals.com/massey-ferg ... 5658-p.asp

Edit: I found this French manual, it includes some parts pages at the end:
https://www.classicmachinery.net/forum/ ... df_id=2998

[gecko.cx]

But the 65 didn't have a 4.236....

Quite right - a smaller 4.

The MF168/180/184 had the 4.236 and is likely to be configured the same.

[topkit]

This is not a parts book but it will help you with working on your 50B it's on Ebay at the moment item number 116054277463 and also this one item number 360451591135. This is the later operators manual Also on Ebay item number 292866011693. This is the parts book on Ebay and here is the parts book on ebay again item number 276306318549. Good luck they are a good digger post some pictures up

[rob99]

Many thanks Holger it will help a lot. I will learn some French

Maybe this?
https://www.agrimanuals.com/massey-ferg ... 5658-p.asp

Edit: I found this French manual, it includes some parts pages at the end:
https://www.classicmachinery.net/forum/ ... df_id=2998