Stabilizer leg levers in cab

[Whitecab jockey]

Hi all.
The stabilizer leg levers are operating together how do I get them to work independently.
Thanks
Mitch

[essexpete]

What is the machine, someone may be able to help?

[Whitecab jockey]

1982 white cab JCB 3cx
Thanks

[Savoy John]

Penetrating oil and patience.

[Whitecab jockey]

Thank you for that. I'm starting to get it ready for the winter so I'll have ago with that.
Regards

[gecko.cx]

Not familiar with the model, but looking at the P7, the two leavers seem to share a common pivot pin, so a penetrant it a likely fix.
It's possible the anchor plate the levers attach to is loose, so both are moving together.
Once you get eyes-on, I think the problem will be clear.

[Whitecab jockey]

Cheers will crack on with it

[topkit]

I had a very similar problem on a fermec 860, I had to take the levers apart as the had corroded onto the shaft after i soaked everything in plusgas i eventually got them and the shaft of the. Digger and then got everything apart and made a new shaft the refitted everything with plenty of grease!