Rubber Seal Between Cab And Chassis

Discuss loaders/backhoes here

Topic author
Posts: 41
Joined: Thu Dec 20, 2012 11:22 pm
Real name: Michael Fox
Location: Dublin
Has thanked: 3 times

Rubber Seal Between Cab And Chassis

Post #1 by mikefoxo » Sat Jan 06, 2018 7:46 pm

I'm looking for a replacement for the seal that goes between the cab and chassis on an old JCB (3MkII). The one on ours has deteriorated and now acts like a sponge, holding in water and slowly rotting the bottom of the cab (is this why they all rotted?). Is there a similar type seal/rubber/product that would do the same job but not degrade and be more harm than good?

Posts: 10
Joined: Sun Aug 03, 2014 11:30 pm
Real name: Ashley Culling
Has thanked: 1 time
Been thanked: 3 times
Flag: Great Britain

Re: Rubber Seal Between Cab And Chassis

Post #2 by justamin » Fri Jan 12, 2018 11:16 pm

Try Woolies trim, or vintage supplies

Land Rover
Posts: 71
Joined: Fri Jul 10, 2015 10:35 pm
Real name: Gordon Short
Has thanked: 3 times
Been thanked: 7 times

Re: Rubber Seal Between Cab And Chassis

Post #3 by Land Rover » Sat Jan 13, 2018 8:43 pm

I have seen people recommend these guys before
They have a nice online catalogue , I see page 30 has flat rubber .
Looks like you would just make one up , punch holes and use some sealant on the corners .
Best of luck , I'm sure it won't be as easy as it looks :D

Return to “Loaders/Backhoes”

Who is online

Users browsing this forum: No registered users and 3 guests