Rubber Seal Between Cab And Chassis
-
Topic author - Posts: 46
- Joined: Thu Dec 20, 2012 11:22 pm
- Real name: Michael Fox
- Location: Dublin
- Has thanked: 3 times
- Flag:
Rubber Seal Between Cab And Chassis
I'm looking for a replacement for the seal that goes between the cab and chassis on an old JCB (3MkII). The one on ours has deteriorated and now acts like a sponge, holding in water and slowly rotting the bottom of the cab (is this why they all rotted?). Is there a similar type seal/rubber/product that would do the same job but not degrade and be more harm than good?
-
- Posts: 82
- Joined: Fri Jul 10, 2015 10:35 pm
- Real name: Gordon Short
- Has thanked: 4 times
- Been thanked: 13 times
Re: Rubber Seal Between Cab And Chassis
I have seen people recommend these guys before
http://phoenixtrim.co.uk/
They have a nice online catalogue , I see page 30 has flat rubber .
Looks like you would just make one up , punch holes and use some sealant on the corners .
Best of luck , I'm sure it won't be as easy as it looks
http://phoenixtrim.co.uk/
They have a nice online catalogue , I see page 30 has flat rubber .
Looks like you would just make one up , punch holes and use some sealant on the corners .
Best of luck , I'm sure it won't be as easy as it looks
Who is online
Users browsing this forum: No registered users and 58 guests