Hi thanks for replay I’m not that familiar with this but when I took the nut off only a plunger was there and a spring.
After taking them out I put the camera there, I never picked around to much.
I’ll try the gravity feed tomorrow
1988 JCB 3xc 4WD Grey Cab
-
- Posts: 642
- Joined: Mon Sep 28, 2009 9:49 pm
- Real name: R
- Location: Co Down
- Has thanked: 14 times
- Been thanked: 188 times
- Flag:
Re: 1988 JCB 3xc 4WD Grey Cab
It does look like there is one....... Just be careful that the delivery valve body etc, doesn't come out wth the filter as there is a plunger that will fall into the hole and it can be a job to fish it back out..........
-
- Posts: 365
- Joined: Sat Aug 11, 2007 11:49 pm
- Real name: dylan jones
- Location: South cheshire
- Has thanked: 40 times
- Been thanked: 33 times
- Flag:
-
Topic author - Posts: 36
- Joined: Tue Dec 19, 2017 7:53 pm
- Real name: Gethin Davies
- Has thanked: 8 times
- Been thanked: 1 time
- Flag:
Re: 1988 JCB 3xc 4WD Grey Cab
Yes there was a filter there. Managed to get it out, was clean. After trying the gravity feed and with little luck I gave up and put everything back, tried the lift pump again and that’s when I saw a leak coming out the pipe that runs from the sediment filter to the lift pump. Hopefully new pipe here will solve the problem.
-
Topic author - Posts: 36
- Joined: Tue Dec 19, 2017 7:53 pm
- Real name: Gethin Davies
- Has thanked: 8 times
- Been thanked: 1 time
- Flag:
Re: 1988 JCB 3xc 4WD Grey Cab
Can anyone help with brakes on my 3cx
Iv changed the oil still making noice on both side Iv changed the pads and plates still making noise?? The old once were in good condition!! One of the pins holding the plate had a bit of play but fix that?
Any one got any ideas what els it could be
Iv changed the oil still making noice on both side Iv changed the pads and plates still making noise?? The old once were in good condition!! One of the pins holding the plate had a bit of play but fix that?
Any one got any ideas what els it could be
Who is online
Users browsing this forum: No registered users and 28 guests