pgplantservices wrote:hi scoob
on the o/s loader bucket tilt ram there is a rod and micro switch,when the lever is held over to the return to dig position the magnet on the underside of the spool valve is energised.
as the bucket ram curls back the rod moves back until it switches the micro switch which in turns breaks the circuit to the magnet on the bucket spool
then the spool returns to the neutral position.
the return to dig position is altered/ adjusted by moving the switch on the ram whilst the bucket is in the dig/flat position
hope this helps
Thanks for that. I'll have a go with it next time I'm on the machine. Something else that has struck me. Does this work when using the up/down lever to crowd the bucket or with the 4 in 1 lever because if you push that sideways it also tips/crowds the bucket ? Or does it work with both ?