Leyland 4.98 nt jcb engine

Discuss loaders/backhoes here

Topic author
davidbrown80
Posts: 77
Joined: Mon Jun 29, 2009 10:45 pm
Real name: Roland
Location: york
Has thanked: 7 times
Been thanked: 6 times
Flag: Great Britain

Leyland 4.98 nt jcb engine

Post #1 by davidbrown80 » Sat Dec 24, 2016 11:41 am

hi can any of you guys tell me what thread size the oil presure and water temp sender units are please
Thanks in advance


tom262
Posts: 15
Joined: Sat Feb 27, 2016 6:31 pm
Real name: tom mc laughlin
Been thanked: 4 times
Flag: Ireland

Re: Leyland 4.98 nt jcb engine

Post #2 by tom262 » Mon Dec 26, 2016 11:14 pm

oil pressure switch 1/8th bsp will check water temp switch


Topic author
davidbrown80
Posts: 77
Joined: Mon Jun 29, 2009 10:45 pm
Real name: Roland
Location: york
Has thanked: 7 times
Been thanked: 6 times
Flag: Great Britain

Re: Leyland 4.98 nt jcb engine

Post #3 by davidbrown80 » Sun Jan 01, 2017 11:40 am

hi
The water temp sender is quite a large fitting and so far not been able to find a replacement sender unit but if i can find out the correct thread size i might be able to find a converter fitting so i can use a modern size ?
thanks for any advice


Return to “Loaders/Backhoes”

Who is online

Users browsing this forum: No registered users and 14 guests