JCB 3c mk2 general information
Posted: Tue Oct 20, 2015 7:46 pm
HI All, my name is Adam and I am new to this forum. I have just invested in a very old/tatty JCB 3c mk2. I am fairly new to diggers etc. however I am a skilled engineer, machinist and welder so I do understand majority of what is there.
I am after some help in what are common issues with this type of machine and the things to look out for before it breaks.
I would also like someone to try and identify what engine I have; it has four injectors so would this possibly be a Leyland.
Jcb machine serial number 3c 106033
Tractor serial no 384B 186005
Engine serial number 20078
In its current state is all runs and the hydraulics works ok, I have fitted new fuel filters and cut open the top of the tank this was to remove all the sludge and crap in the bottom, (welded the top back on) I have fitted a new ignition switch so it can now be started on the key, fitted a new lift pump, and its ran every weekend since.
I need to give the hydraulics and good going over etc but any help on some tips and possibly where to get spares etc would be really great.
Kind regards Adam
I am after some help in what are common issues with this type of machine and the things to look out for before it breaks.
I would also like someone to try and identify what engine I have; it has four injectors so would this possibly be a Leyland.
Jcb machine serial number 3c 106033
Tractor serial no 384B 186005
Engine serial number 20078
In its current state is all runs and the hydraulics works ok, I have fitted new fuel filters and cut open the top of the tank this was to remove all the sludge and crap in the bottom, (welded the top back on) I have fitted a new ignition switch so it can now be started on the key, fitted a new lift pump, and its ran every weekend since.
I need to give the hydraulics and good going over etc but any help on some tips and possibly where to get spares etc would be really great.
Kind regards Adam