Jcb 3c mk111

[agrimax]

Adam,the powertrain dashes were all as in the one in William's link. The dash in the older Brockhouse torque converter models was the same as used in the manual geared mk2 and 3 diggers.
No reason why a jaw bucket can't be fitted on any digger,provided an extra service is supplied to operate it,such as a hammer circuit or a retrofitted solenoid valve linked through an existing spool lever.A handbreaker will work on any machine too. Just a matter of plumbing.

[essexpete]

Hammer circuit or extender hoe would have a tandem pump fitted and you could see the extra tin work sticking out below the grill on such machines.