Dowty Rotary Actuator - PARTS REQUIRED
-
Steelfab
Topic author - Posts: 230
- Joined: Fri Jan 25, 2008 12:39 pm
- Real name: Julian Carder
- Location: Uttoxeter, Staffordshire, England
- Been thanked: 63 times
Dowty Rotary Actuator - PARTS REQUIRED
Does anyone have any replacement parts or the Dowty Rotary actuators used on Steelfab, Inchgreen, Massey backhoe loaders. Need the replacement seals and rotary shaft?
-
Jeremy Rowland
- Moderator
- Posts: 8677
- Joined: Sun Aug 05, 2007 8:36 pm
- Real name: Jeremy Rowland
- Has thanked: 1873 times
- Been thanked: 1692 times
Re: Dowty Rotary Actuator - PARTS REQUIRED
Julian the seals could easily be made, you could try Tony Flint he may be able to help you out, contact me and I'll put you in touch with him.
Jeremy
Jeremy
-
essexpete
- Posts: 4070
- Joined: Fri Jul 13, 2007 12:43 am
- Real name: essexpete
- Has thanked: 853 times
- Been thanked: 684 times
Re: Dowty Rotary Actuator - PARTS REQUIRED
Jeremy Rowland wrote:Julian the seals could easily be made, you could try Tony Flint he may be able to help you out, contact me and I'll put you in touch with him.
Jeremy
Jeremy I am not sure that internal seals on the actuator paddle would be easily made?
-
Jeremy Rowland
- Moderator
- Posts: 8677
- Joined: Sun Aug 05, 2007 8:36 pm
- Real name: Jeremy Rowland
- Has thanked: 1873 times
- Been thanked: 1692 times
Re: Dowty Rotary Actuator - PARTS REQUIRED
essexpete wrote:Jeremy Rowland wrote:Julian the seals could easily be made, you could try Tony Flint he may be able to help you out, contact me and I'll put you in touch with him.
Jeremy
Jeremy I am not sure that internal seals on the actuator paddle would be easily made?
Pete do you have a picture of some similar seals?
Jeremy
-
Steelfab
Topic author - Posts: 230
- Joined: Fri Jan 25, 2008 12:39 pm
- Real name: Julian Carder
- Location: Uttoxeter, Staffordshire, England
- Been thanked: 63 times
Re: Dowty Rotary Actuator - PARTS REQUIRED
I have the internal o rings but it is the rectangular ones which are needed. I do have some new old stock, but they are cracked due to age. If I cannot find any new ones I will get new ones made using the new perished ones I have
-
topkit
- Posts: 806
- Joined: Mon Sep 22, 2008 11:55 pm
- Real name: David
- Location: KENT
- Has thanked: 76 times
- Been thanked: 179 times
- Flag:
Re: Dowty Rotary Actuator - PARTS REQUIRED
I the actuator it the same as the MF40 /50 you could try P V Dobsons they are massey dealers and hold quite a bit of stock for older masseys if they havent got the seals they can more than likely source them for you
-
Jeremy Rowland
- Moderator
- Posts: 8677
- Joined: Sun Aug 05, 2007 8:36 pm
- Real name: Jeremy Rowland
- Has thanked: 1873 times
- Been thanked: 1692 times
Re: Dowty Rotary Actuator - PARTS REQUIRED
Steelfab wrote:I have the internal o rings but it is the rectangular ones which are needed. I do have some new old stock, but they are cracked due to age. If I cannot find any new ones I will get new ones made using the new perished ones I have
Julian what are the rectangular ones made from?
Jeremy
-
essexpete
- Posts: 4070
- Joined: Fri Jul 13, 2007 12:43 am
- Real name: essexpete
- Has thanked: 853 times
- Been thanked: 684 times
Re: Dowty Rotary Actuator - PARTS REQUIRED
Jeremy Rowland wrote:essexpete wrote:Jeremy Rowland wrote:Julian the seals could easily be made, you could try Tony Flint he may be able to help you out, contact me and I'll put you in touch with him.
Jeremy
Jeremy I am not sure that internal seals on the actuator paddle would be easily made?
Pete do you have a picture of some similar seals?
Jeremy
Sorry Jeremy but it is 30+ years since I had the one on our 220 digger apart. Then you still source them from the MF agent. ('kin expensive even then if IIRR)
Who is online
Users browsing this forum: No registered users and 46 guests