I believe the MKII cabs are different to the MKIII and between models. My 3 MKIII (1973) has a different cab and completely different rear window design to the 3C MK III (1978). I do have a comlpete set of drawing for the cab which are dated November 1976 which was obviously several months prior to introduction which was around mid 1977 for the 3C MKIII.
The drawing are highly complicated for the cab and even the company who are making the profiles are stuggling to find all the information they need. I am hoping to lift the cab off the machine tonight and then work will start tomorrow cutting out the rotten base frame to have replaced
JCB 3C Reproduction Cabs, Flat Pack
-
- Posts: 1
- Joined: Mon Sep 30, 2013 2:21 pm
- Real name: John Allan
Re: JCB 3C Reproduction Cabs, Flat Pack
Hi Folks
Im looking for CAB pressings or complete cab
My 3D3 cab is ok top but rusted away on the lower section -I was looking at making templates and getting the parts cut out -but if you have access to the drawings /or better still can get preesings Id be intersted
Thanks
Im looking for CAB pressings or complete cab
My 3D3 cab is ok top but rusted away on the lower section -I was looking at making templates and getting the parts cut out -but if you have access to the drawings /or better still can get preesings Id be intersted
Thanks
Who is online
Users browsing this forum: No registered users and 48 guests