Parts manual.

Discuss loaders/backhoes here

Topic author
Scooby
Posts: 284
Joined: Wed Sep 17, 2008 1:29 am
Real name: DGL
Location: Warwickshire
Has thanked: 14 times
Been thanked: 4 times
Flag: Great Britain

Parts manual.

Post #1 by Scooby » Sat May 14, 2011 5:09 pm

I have searched this Forum but can't find what I am looking for. I need a parts manual for a 1992 Project 8 3CX Site Master. Are they available for downloading anywhere please ?

TIA.
Six up front .............................means plenty of grunt.

Image Image

User avatar

Mark.Rive
Posts: 542
Joined: Sat Oct 30, 2010 8:27 pm
Real name: Mark Rive
Location: Guernsey
Has thanked: 33 times
Been thanked: 26 times

Re: Parts manual.

Post #2 by Mark.Rive » Sun May 15, 2011 7:45 pm

Hi, cant send you the manual but if you let me know your serial number and what you're after I'll post the pages with diagrams and part numbers. :thumbup: Mark


Topic author
Scooby
Posts: 284
Joined: Wed Sep 17, 2008 1:29 am
Real name: DGL
Location: Warwickshire
Has thanked: 14 times
Been thanked: 4 times
Flag: Great Britain

Re: Parts manual.

Post #3 by Scooby » Sun May 15, 2011 8:37 pm

Mark.Rive wrote:Hi, cant send you the manual but if you let me know your serial number and what you're after I'll post the pages with diagrams and part numbers. :thumbup: Mark


Crikey Mark, that would be helpful. I just wanted to make sure that I was ordering the correct near side door catch for my 1992 Project 8. The machine serial no. is 412628.

Thanks a bunch - David.
Six up front .............................means plenty of grunt.

Image Image

User avatar

Mark.Rive
Posts: 542
Joined: Sat Oct 30, 2010 8:27 pm
Real name: Mark Rive
Location: Guernsey
Has thanked: 33 times
Been thanked: 26 times

Re: Parts manual.

Post #4 by Mark.Rive » Mon May 16, 2011 9:48 pm

Hi David, never realised that there were so many different doors on a 3CX :dizzy: Anyway this is the one that sits in your serial number break. If its not right let me know and I'll hunt out the next one :thumbup: Mark
You do not have the required permissions to view the files attached to this post.


Topic author
Scooby
Posts: 284
Joined: Wed Sep 17, 2008 1:29 am
Real name: DGL
Location: Warwickshire
Has thanked: 14 times
Been thanked: 4 times
Flag: Great Britain

Re: Parts manual.

Post #5 by Scooby » Mon May 16, 2011 10:18 pm

Mark.Rive wrote:Hi David, never realised that there were so many different doors on a 3CX :dizzy: Anyway this is the one that sits in your serial number break. If its not right let me know and I'll hunt out the next one :thumbup: Mark


Many thanks Mark, that is the right one. You're a star. :thumbup: :thumbup: :thumbup: Will order one from DiggerParts tomorrow. Then I will be able to do away with the piece of wire. :roll:
Six up front .............................means plenty of grunt.

Image Image

User avatar

Mark.Rive
Posts: 542
Joined: Sat Oct 30, 2010 8:27 pm
Real name: Mark Rive
Location: Guernsey
Has thanked: 33 times
Been thanked: 26 times

Re: Parts manual.

Post #6 by Mark.Rive » Tue May 17, 2011 9:26 pm

Glad to be of service :thumbup: Best keep the wire for the other side :lol:


Topic author
Scooby
Posts: 284
Joined: Wed Sep 17, 2008 1:29 am
Real name: DGL
Location: Warwickshire
Has thanked: 14 times
Been thanked: 4 times
Flag: Great Britain

Re: Parts manual.

Post #7 by Scooby » Tue May 17, 2011 9:37 pm

Mark.Rive wrote:Glad to be of service :thumbup: Best keep the wire for the other side :lol:


Never use the other side Mark. Got too much clutter there. Shovel, fork, slash hook. tamper, lunch, blah di blah. ;)

Q: Do you know my definition of a good digger driver ?
A: One who knows when to get off his backside and use a bloody shovel. :lol: :lol: :lol:

Thanks again Mark. All sorted now.
Six up front .............................means plenty of grunt.

Image Image


Return to “Loaders/Backhoes”

Who is online

Users browsing this forum: No registered users and 9 guests