Terex scraper configuration
-
Topic author - Posts: 111
- Joined: Sun Jan 17, 2010 3:09 am
- Real name: Taylor Lambert
Terex scraper configuration
I saw the TS8 in the how not to park a scraper forum below and seen other Terex scrapers in Classic Plant and Machinery mag. I was wonterdin why al lthe Terex machines in England have flat plate covers on their radiator housings. Is it for warming up earlier or puncture protection. Ive run a few Terex scrapers a few years ago that had the grated grills. I noticed that both engines were covered like that. I really enjoyed the pictures of the TS8 Ive never seen one here, Dad grew up running S-7 Euclids when he was 16.
-
- Posts: 1
- Joined: Sat Aug 21, 2010 4:44 am
- Real name: Roger Horne
Re: Terex scraper configuration
Hi Taylor, I have an enquiry from a guy in Australia looking for a spec sheet on the smaller Terex TS 8 or I think there may have been a TS 11 ( not sure) . Do you know where I can locate some specifications or photos .. Thank you Roger Horne
-
- Posts: 14
- Joined: Sun Jan 18, 2009 1:54 am
- Real name: Mervyn Pepper
- Location: coromandel peninsula. New Zealand
Re: Terex scraper configuration
Hi Greenmount 7.
A few TS8s ; some people call them TS11s as rated capacity was 8 yd struck 11 heaped;
made it down under to NZ. Could be as many as 10 here.
powered by 330 Bedford diesels at about 100hp each.
Have spent abit of time on them, will post a pic if i have one.
Merv
A few TS8s ; some people call them TS11s as rated capacity was 8 yd struck 11 heaped;
made it down under to NZ. Could be as many as 10 here.
powered by 330 Bedford diesels at about 100hp each.
Have spent abit of time on them, will post a pic if i have one.
Merv
-
- Posts: 6393
- Joined: Mon Nov 03, 2008 8:06 pm
- Real name: MARTYN WILLIAMS
- Location: South Wales
- Has thanked: 296 times
- Been thanked: 359 times
Re: Terex scraper configuration
A couple of scrapers for you to view,They have since been cut up
Martyn
Martyn
You do not have the required permissions to view the files attached to this post.
-
Topic author - Posts: 111
- Joined: Sun Jan 17, 2010 3:09 am
- Real name: Taylor Lambert
Re: Terex scraper configuration
Sad end to goods machines. I here alot of folks cuss them but they are good simple machines. 2 local contractors that have rough operators run them and they are the only machines that hold up. Im interested in the sheilds over the radiators. About 50 miles away there 2 older men that are brothers that refurbish anything Terex. I love to stop by their shop and hear the tales and see the old Terex machines.
-
- Posts: 5422
- Joined: Tue Jun 12, 2007 10:10 pm
- Real name: Nick Drew
- Has thanked: 437 times
- Been thanked: 208 times
Re: Terex scraper configuration
TaylorLambert wrote:Sad end to goods machines. I here alot of folks cuss them but they are good simple machines. 2 local contractors that have rough operators run them and they are the only machines that hold up. Im interested in the sheilds over the radiators. About 50 miles away there 2 older men that are brothers that refurbish anything Terex. I love to stop by their shop and hear the tales and see the old Terex machines.
That place sounds great Taylor, have you got any photos from there or could you possibly snap some next time you visit?
Nick
Digger Man Blog at Earthmovers http://www.earthmoversmagazine.co.uk/?page_id=3092
Digger Man Blog Facebook page, https://www.facebook.com/groups/1422908344617046/
You Tube Channel https://www.youtube.com/channel/UC_PJQrzRauAM6ANLxhhcGFA
Digger Man Blog Facebook page, https://www.facebook.com/groups/1422908344617046/
You Tube Channel https://www.youtube.com/channel/UC_PJQrzRauAM6ANLxhhcGFA
-
- Posts: 6393
- Joined: Mon Nov 03, 2008 8:06 pm
- Real name: MARTYN WILLIAMS
- Location: South Wales
- Has thanked: 296 times
- Been thanked: 359 times
Re: Terex scraper configuration
Re the TS8 with Bedford engines, I seem to remember that they were designed for the army, small enough to be dropped from a Hercules, that sort of thing. What happened to the TTS14 ? We had on on demo from Blackwood Hodge on the M5 at Cheltenham back around 1969. Three engines and twin bowls with a rather ugley swan neck connection the rear box. Never seen one since. Bit of a crib from LeTourneau L60
-
- Posts: 1606
- Joined: Sun Apr 19, 2009 2:54 pm
- Real name: clive gray
- Location: sussex,england
- Has thanked: 174 times
- Been thanked: 242 times
- Flag:
- Contact:
Re: Terex scraper configuration
The man to ask is Benny White, he's been breeding them but some where for sale. Not sure if they sold or not. Three came from a dealer in sussex who got them of Mark Woollard who got them of Mole excavations who did alot of work for some golf outfit. Mr Mole (not his real name) got them of the army, a job lot of 6. Good to begin with I was told but over time they kept getting cannablised to keep them going. Lots of noise and little action! High maintenance.........but I suppose they dont make a scraper that isn't!
By the way, apparently they only made about 36 specials for the army that could fit into a hercules, and some went done on the way to the falklands on the Atlantic Conveyor.
By the way, apparently they only made about 36 specials for the army that could fit into a hercules, and some went done on the way to the falklands on the Atlantic Conveyor.
-
- Posts: 1440
- Joined: Mon Apr 25, 2011 7:51 pm
- Real name: nicky lamb
- Has thanked: 7 times
- Been thanked: 43 times
Re: Terex scraper configuration
The grills are for sound suppression reasons.They made a huge difference as they sent all the noise upwards instead of forwards.
Here's a couple of TS14B's,one with the noise kit and one without.I can tell that I never had any overheating probs with the noise kits.
Hey up Clive,I see there's a nice 8K from the same stable as those 637's up for sale.Got the pics by the way,thanks
Here's a couple of TS14B's,one with the noise kit and one without.I can tell that I never had any overheating probs with the noise kits.
Hey up Clive,I see there's a nice 8K from the same stable as those 637's up for sale.Got the pics by the way,thanks
You do not have the required permissions to view the files attached to this post.
Who is online
Users browsing this forum: No registered users and 16 guests