Hi All,
Retirement forces sale of a few machines, here are the first two I want to sell.
they are both fully serviced and ready to go.
Fred.
Oct 2006 Hanix H15B Plus 2. 1.5 tonne.
Full cab, blade, 4 buckets, Quick-hitch, Expanding tracks, piped for hammer.
Machine is no worse than new, only 518 hrs. £8,500 - 00 plus vat.
1998 Sumitomo SH135U. 13.5 tonne. Zero tail swing.
Geith manual quick hitch, blade, Parallel offset boom, 3 buckets, good steel tracks with bolt on rubber pads, "Cabguard " window shutters. No leaks or pin wear,two new batteriesbatteries.
5,454 genuine hours. £19,500 - 00 o.n.o plus vat.
Diggers for sale
Forum rules
Please use so called TAGS in the subject of the post when posting in here.
[For sale]
[Wanted]
[Exchange]
[Swap]
Please use so called TAGS in the subject of the post when posting in here.
[For sale]
[Wanted]
[Exchange]
[Swap]
-
FOWLER MAN
Topic author - Posts: 2358
- Joined: Wed Dec 09, 2009 11:28 pm
- Real name: fred evans
- Has thanked: 1295 times
- Been thanked: 1111 times
- Flag:
-
FOWLER MAN
Topic author - Posts: 2358
- Joined: Wed Dec 09, 2009 11:28 pm
- Real name: fred evans
- Has thanked: 1295 times
- Been thanked: 1111 times
- Flag:
Re: Diggers for sale
Hello again.
The small Hanix has gone and had a reasonable offer for the Sumitomo. Buyer supposed to be coming to see it next week.
Heres another one to go Oct. 2006 Hanix 36 CR, 1275 genuine hours,Zero tail swing, rubber tracks, blade and 5 buckets.
£12,500 plus VAT,
There is an Atlas Copco hammer for this machine too. 3 years old, but only used 2 to 3 months.
£ 1,200 plus VAT
The tipper and ramps in the pic. must go too.
The ramps are Sara Alluminium Ramps rated at 3.5 tonnes.
£450 plus VAT.
The tipper is an old 1995 Renault Midliner 7.5 tonner. She's in exceptional condition for her age, payload over 3.5 tonnes, Perkins turbo engine and 5 speed box. Test to end Feb. next year.
Must be worth £1,800 to someone.
There are also two Merc. Sprinter vans to go, about £ 1,500 a piece, the oldest one is in the photos above. I'll post details of these and several itams of small plant shortly.
Fred
The small Hanix has gone and had a reasonable offer for the Sumitomo. Buyer supposed to be coming to see it next week.
Heres another one to go Oct. 2006 Hanix 36 CR, 1275 genuine hours,Zero tail swing, rubber tracks, blade and 5 buckets.
£12,500 plus VAT,
There is an Atlas Copco hammer for this machine too. 3 years old, but only used 2 to 3 months.
£ 1,200 plus VAT
The tipper and ramps in the pic. must go too.
The ramps are Sara Alluminium Ramps rated at 3.5 tonnes.
£450 plus VAT.
The tipper is an old 1995 Renault Midliner 7.5 tonner. She's in exceptional condition for her age, payload over 3.5 tonnes, Perkins turbo engine and 5 speed box. Test to end Feb. next year.
Must be worth £1,800 to someone.
There are also two Merc. Sprinter vans to go, about £ 1,500 a piece, the oldest one is in the photos above. I'll post details of these and several itams of small plant shortly.
Fred
You do not have the required permissions to view the files attached to this post.
Who is online
Users browsing this forum: No registered users and 16 guests