Smith Rodley
-
- Posts: 48
- Joined: Tue Nov 03, 2009 4:31 pm
- Real name: Stephen Carter
Re: Smith Rodley
Lorain MC4 20 tonner 6 x 6 chassis uprated from a 15 tonner by Walter Wolfenden of Liverpool by adding extra ballast and more falls in hoist rope.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 48
- Joined: Tue Nov 03, 2009 4:31 pm
- Real name: Stephen Carter
Re: Smith Rodley
Same crane about to unload a lancashire boiler
You do not have the required permissions to view the files attached to this post.
-
- Posts: 92
- Joined: Tue Oct 21, 2008 12:50 am
- Real name: Adrie
- Location: Zuid Hollandse eilanden
- Been thanked: 10 times
- Flag:
- Contact:
Re: Smith Rodley
Nice pictures, I have seen the 12 before, but the C4050 I haven't seen yet.
The pictures of the 12 en de 40, are they taken on the same place?
The pictures of the 12 en de 40, are they taken on the same place?
-
- Posts: 48
- Joined: Tue Nov 03, 2009 4:31 pm
- Real name: Stephen Carter
-
- Posts: 92
- Joined: Tue Oct 21, 2008 12:50 am
- Real name: Adrie
- Location: Zuid Hollandse eilanden
- Been thanked: 10 times
- Flag:
- Contact:
Re: Smith Rodley
Your right Stephen, I always mix up the 10,12 and the 21.
I need always a closer look.
I need always a closer look.
-
- Posts: 2358
- Joined: Wed Dec 09, 2009 11:28 pm
- Real name: fred evans
- Has thanked: 1295 times
- Been thanked: 1111 times
- Flag:
Re: Smith Rodley
Hello,
Just a couple of fotos of a Smith 40-50.
I hired this one from W.T.Davies for a culvert job I did on The Dock Feeder in the centre of Cardiff circa 1985.We over-pumped the water whilst we lifted in the concrete units.
The Smith handled these 12 tonne units with ease at long reach. I cant remember how long the stick was now.
The excavator is a 108S, one of seven Preistmans I ran at that time. More on these elsewhere in due course.
Just a couple of fotos of a Smith 40-50.
I hired this one from W.T.Davies for a culvert job I did on The Dock Feeder in the centre of Cardiff circa 1985.We over-pumped the water whilst we lifted in the concrete units.
The Smith handled these 12 tonne units with ease at long reach. I cant remember how long the stick was now.
The excavator is a 108S, one of seven Preistmans I ran at that time. More on these elsewhere in due course.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 92
- Joined: Tue Oct 21, 2008 12:50 am
- Real name: Adrie
- Location: Zuid Hollandse eilanden
- Been thanked: 10 times
- Flag:
- Contact:
-
- Posts: 790
- Joined: Sat Nov 29, 2008 2:40 am
- Real name: Dave
- Location: Northern England
- Has thanked: 57 times
- Been thanked: 5 times
- Contact:
Re: Smith Rodley
A Smith Rodley seen earlier this month under restoration near Bristol
You do not have the required permissions to view the files attached to this post.
Interested in Tractors, Plant, Heavy Haulage or Steam visit http://tractors.wikia.com/wiki/Tractor_%26_Construction_Plant_Wiki
Help document every manufacturer model build, and record every machine in preservation, clubs and events etc.
Help document every manufacturer model build, and record every machine in preservation, clubs and events etc.
-
- Posts: 6393
- Joined: Mon Nov 03, 2008 8:06 pm
- Real name: MARTYN WILLIAMS
- Location: South Wales
- Has thanked: 296 times
- Been thanked: 359 times
Re: Smith Rodley
Looking good Dave,where to near Bristol ? This machine will look fantastic when completed
Martyn
Martyn
Who is online
Users browsing this forum: No registered users and 8 guests