Found a picture of a model that had a turret fitted on it so it could pile in water. I had a Volvo going spare, the turret from the Liebherr A954 and made a custom pile rig attachment. Can't decide on the colour as of yet. So here you are, hope you like it.
A close up of the turret. perfect fit, just had to drill two holes in the base for the screws to fit. The walkway is off a Komatsu PC1100.
At minimum height
At maximum height
A ground level view looking up at the boom
A close look at the hammer and winch that lifts/lowers the hammer.
Custom Volvo EC650 high rise pile rig model
-
Topic author - Posts: 467
- Joined: Sat May 10, 2008 6:14 pm
- Real name: Geraint Jones
- Location: Carmarthen Wales
- Has thanked: 5 times
- Been thanked: 6 times
-
Topic author - Posts: 467
- Joined: Sat May 10, 2008 6:14 pm
- Real name: Geraint Jones
- Location: Carmarthen Wales
- Has thanked: 5 times
- Been thanked: 6 times
-
- Posts: 549
- Joined: Tue Jan 06, 2009 11:03 pm
- Real name: john smith
- Location: oldbury west midlands
- Been thanked: 1 time
Re: Custom Volvo EC650 high rise pile rig model
yeah that would look good get going then we want to see finished and out on hire
Return to “Earthmoving models”
Who is online
Users browsing this forum: No registered users and 45 guests