rear wheel, for a winget 3 bolt pattern wanted
-
Topic author - Posts: 16
- Joined: Fri Mar 04, 2022 11:42 am
- Real name: Ian
- Has thanked: 12 times
- Been thanked: 3 times
- Flag:
rear wheel, for a winget 3 bolt pattern wanted
I don't suppose anyone has a rear wheel 16 x 4 ( 3 bolt pattern) that will fit a winget dumper? I have been In contact with winget, they can get one made! but it's very expensive. I'm in the Nottinghamshire area but happy to travel Ian
-
Topic author - Posts: 16
- Joined: Fri Mar 04, 2022 11:42 am
- Real name: Ian
- Has thanked: 12 times
- Been thanked: 3 times
- Flag:
Re: rear wheel, for a winget 3 bolt pattern wanted
Hi essexpete, it's the rim about 1/3 is rotted out. I'm thinking about cutting out the rot and replacing it. But obviously a replacement wheel would be loads easier! But I suppose these challenges make us who we are, but stronger!
-
- Posts: 476
- Joined: Thu May 17, 2018 6:08 am
- Real name: John
- Location: Coopernook. NSW. Australia
- Has thanked: 302 times
- Been thanked: 138 times
- Flag:
Re: rear wheel, for a winget 3 bolt pattern wanted
Another option is to cut out the good 3 stud hole wheel centre and weld it into a good rim. Sounds scarey but easy to do.
Cheers Cobba
Re: rear wheel, for a winget 3 bolt pattern wanted
I don't have a spare one, but you might want to check out local scrap yards or online marketplaces like eBay. Sometimes, you can find used parts at a more reasonable price.
-
- Posts: 476
- Joined: Thu May 17, 2018 6:08 am
- Real name: John
- Location: Coopernook. NSW. Australia
- Has thanked: 302 times
- Been thanked: 138 times
- Flag:
Re: rear wheel, for a winget 3 bolt pattern wanted
Might also try FaceAche Market Place. I have been finding some treasures there of late.
Cheers Cobba
-
Topic author - Posts: 16
- Joined: Fri Mar 04, 2022 11:42 am
- Real name: Ian
- Has thanked: 12 times
- Been thanked: 3 times
- Flag:
Re: rear wheel, for a winget 3 bolt pattern wanted
whhh45 wrote:I don't have a spare one, but you might want to check out local scrap yards or online marketplaces like eBay. Sometimes, you can find used parts at a more reasonable price.
Thanks I've been looking all over the place
-
- Posts: 476
- Joined: Thu May 17, 2018 6:08 am
- Real name: John
- Location: Coopernook. NSW. Australia
- Has thanked: 302 times
- Been thanked: 138 times
- Flag:
Re: rear wheel, for a winget 3 bolt pattern wanted
dont give up. Sometimes parts take a bit of time so start attending swap meets and rallies as well as the online stuff.
Cheers Cobba
Who is online
Users browsing this forum: No registered users and 4 guests