Identifying my dumper
-
Topic author - Posts: 2
- Joined: Sat Nov 24, 2018 7:19 pm
- Real name: Gavin Timlin
- Flag:
Identifying my dumper
I have my self a little dumper, it's benford, I think but I can't find an exact match to it, it's almost the same as a tf50 but the engine different than the drawings. Is there a model ID plate on the machine some where? And suggestions would be much appreciated. Thanks all
You do not have the required permissions to view the files attached to this post.
-
- Posts: 475
- Joined: Thu May 17, 2018 6:08 am
- Real name: John
- Location: Coopernook. NSW. Australia
- Has thanked: 302 times
- Been thanked: 138 times
- Flag:
Re: Identifying my dumper
Is there some tin ware missing behind where you are sitting?
If so that is possibly where the ID tag is
If so that is possibly where the ID tag is
Cheers Cobba
-
Topic author - Posts: 2
- Joined: Sat Nov 24, 2018 7:19 pm
- Real name: Gavin Timlin
- Flag:
Re: Identifying my dumper
It has defo had some modifications before I had it I think the engine had been uncovered and a few bits have been welded on, thanks for the conimation. She had lost a little power and started blowing black smoke, any ideas o that?
-
- Posts: 475
- Joined: Thu May 17, 2018 6:08 am
- Real name: John
- Location: Coopernook. NSW. Australia
- Has thanked: 302 times
- Been thanked: 138 times
- Flag:
Re: Identifying my dumper
Try new fuel and air filters and put a little fuel cleaner in the system and run it. Otherwise it might be getting too much fuel or the injector needs a service.
I start with the simple things first and work my way forward from there.
I start with the simple things first and work my way forward from there.
Cheers Cobba
Who is online
Users browsing this forum: No registered users and 28 guests