PH2 oil level

Discuss dumpers here

Topic author
womble3go
Posts: 27
Joined: Wed Oct 14, 2009 8:04 pm
Real name: kevin
Been thanked: 4 times

PH2 oil level

Post #1 by womble3go » Mon Jul 02, 2018 12:16 am

HI,

Hoping that some one can help me I have a PH2 in my dumper on the dip stick there is only one mark on it is this the min level or max?

My PH1 has 2 marks on stick is easy to get right.

Thank you.


Jeremy Rowland
Moderator
Posts: 8667
Joined: Sun Aug 05, 2007 8:36 pm
Real name: Jeremy Rowland
Has thanked: 1867 times
Been thanked: 1688 times

Re: PH2 oil level

Post #2 by Jeremy Rowland » Mon Jul 02, 2018 7:54 am

womble3go wrote:HI,

Hoping that some one can help me I have a PH2 in my dumper on the dip stick there is only one mark on it is this the min level or max?

My PH1 has 2 marks on stick is easy to get right.

Thank you.


Kevin as a general rule if there is only one mark on the stick then it is the maximum mark hope that answers your question. :thumbup:

Jeremy


cobbadog
Posts: 475
Joined: Thu May 17, 2018 6:08 am
Real name: John
Location: Coopernook. NSW. Australia
Has thanked: 302 times
Been thanked: 138 times
Flag: Australia

Re: PH2 oil level

Post #3 by cobbadog » Mon Jul 02, 2018 8:28 am

G'Day Kevin, If you have a manual on your engine then next oil change fill it up with the correct amount of oil less 1 litre or pint and insert the dip stick. This can then be permanently marked using a hacksaw and will be your minimum level. Then pour in the rest and it should be on you existing line if all goes well.
Cheers Cobba


mechman
Posts: 501
Joined: Mon Nov 18, 2013 4:13 pm
Real name: norman orrick
Location: N.E.Lincs
Has thanked: 142 times
Been thanked: 132 times
Flag: Great Britain

Re: PH2 oil level

Post #4 by mechman » Mon Jul 02, 2018 4:36 pm

Hi Kevin
My PH2 has 2 marks on the stick, may be yours could be off an oddball, can you put another mark on it?
Norm.


Topic author
womble3go
Posts: 27
Joined: Wed Oct 14, 2009 8:04 pm
Real name: kevin
Been thanked: 4 times

Re: PH2 oil level

Post #5 by womble3go » Mon Jul 02, 2018 11:46 pm

Thank you for these reply's, I like the one of under filling then putting in the second mark, so will go for this.

Kevin.

User avatar

FOWLER MAN
Posts: 2358
Joined: Wed Dec 09, 2009 11:28 pm
Real name: fred evans
Has thanked: 1295 times
Been thanked: 1111 times
Flag: Wales

Re: PH2 oil level

Post #6 by FOWLER MAN » Wed Jul 04, 2018 7:23 pm

Hi,
The PH1 & 2 Should have the same dipstick.
The crank case casting of the PH1 is only a shorter version of the PH2 casting.
Everything else including the dipstick has the same dimension so just mark the one dipstick agsinst the other.
The part Nos of both sticks are the same.
Fred


Return to “Dumpers”

Who is online

Users browsing this forum: No registered users and 15 guests