Unknown Dumper seen on ebay
-
- Posts: 4070
- Joined: Fri Jul 13, 2007 12:43 am
- Real name: essexpete
- Has thanked: 853 times
- Been thanked: 684 times
Re: Unknown Dumper seen on ebay
If you don't know Fred who will! I wonder if it was fitted with a BMC heavy van/light truck clutch and gearbox as well. The final drive might have made the reductions?
-
- Posts: 1976
- Joined: Fri Oct 17, 2008 3:22 pm
- Real name: craig
- Location: North Yorks
- Has thanked: 156 times
- Been thanked: 374 times
- Flag:
Re: Unknown Dumper seen on ebay
A while back bought a 1979 Benford 'Construction Equipment Catalogue' off Fleabay, unusually this is in the form of a rather nice large hardback book .
Glanced at it tonight when tidying bookshelves and lo and behold on page 7 is this very machine .
It is a Benford TS60 looking antiquated even back then. 3 ton payload , 51bhp Leyland 120 engine .
Trying to cull some transport books but you start reading them and think this is interesting , then when you decide you can part there is the ebay/ charity shop / autojumble dilema
Craig
Glanced at it tonight when tidying bookshelves and lo and behold on page 7 is this very machine .
It is a Benford TS60 looking antiquated even back then. 3 ton payload , 51bhp Leyland 120 engine .
Trying to cull some transport books but you start reading them and think this is interesting , then when you decide you can part there is the ebay/ charity shop / autojumble dilema
Craig
Not all those who wander are lost.
-
- Moderator
- Posts: 8677
- Joined: Sun Aug 05, 2007 8:36 pm
- Real name: Jeremy Rowland
- Has thanked: 1873 times
- Been thanked: 1692 times
Re: Unknown Dumper seen on ebay
XS650 wrote:A while back bought a 1979 Benford 'Construction Equipment Catalogue' off Fleabay, unusually this is in the form of a rather nice large hardback book .
Glanced at it tonight when tidying bookshelves and lo and behold on page 7 is this very machine .
It is a Benford TS60 looking antiquated even back then. 3 ton payload , 51bhp Leyland 120 engine .
Trying to cull some transport books but you start reading them and think this is interesting , then when you decide you can part there is the ebay/ charity shop / autojumble dilema
Craig
Craig; yes I know what you mean just having had a massive book cull myself with over 70 books going to the local charity shop.
Jeremy
-
- Posts: 1976
- Joined: Fri Oct 17, 2008 3:22 pm
- Real name: craig
- Location: North Yorks
- Has thanked: 156 times
- Been thanked: 374 times
- Flag:
Re: Unknown Dumper seen on ebay
essexpete wrote:Well done Craig, nobody except us anoraks here on CMN give a FF !
So true !
But we are probably the best at identifying these old dumpers , someone's got to do it !
Will post pic of the Benford TS60 when I get a chance to scan it in .
Craig
Not all those who wander are lost.
-
- Posts: 1976
- Joined: Fri Oct 17, 2008 3:22 pm
- Real name: craig
- Location: North Yorks
- Has thanked: 156 times
- Been thanked: 374 times
- Flag:
Re: Unknown Dumper seen on ebay
The mighty Benford TS60 -
With a two range gearbox I wonder if it's based on reversed Leyland tractor components, a real hark to the past .
Incidentally the name on the dumper in original pic ROOFF are a firm of East London builders who still trade see web.
I thought the red tick on the grille may be something to do with the NHBC Right First Time campaign , but it looks as though there is a tick on the grille in the brochure ?
Real anorak stuff now !
Craig
With a two range gearbox I wonder if it's based on reversed Leyland tractor components, a real hark to the past .
Incidentally the name on the dumper in original pic ROOFF are a firm of East London builders who still trade see web.
I thought the red tick on the grille may be something to do with the NHBC Right First Time campaign , but it looks as though there is a tick on the grille in the brochure ?
Real anorak stuff now !
Craig
Not all those who wander are lost.
-
- Posts: 4070
- Joined: Fri Jul 13, 2007 12:43 am
- Real name: essexpete
- Has thanked: 853 times
- Been thanked: 684 times
Re: Unknown Dumper seen on ebay
Well done Craig. That could be one of the rarest 'modern' machines around. I can't think they would have made many as pivot steer 4wd would have eclipsed. Bi driving wheels would have travelled well I reckon. It is either a tractor gear box or a small 3 fwd speed and transfer. There could be reduction in the drive axle?
Who is online
Users browsing this forum: No registered users and 57 guests