Volvo EC25
Posted: Mon Aug 27, 2018 9:49 am
Hi
I’m struggling to find out why my machines shuts down totally after 1-2 hours work. I then turn the ignition and nothing for a few minutes until the radio comes on. But still after putting the code in, it won’t even turn over. I then have to leave it for 15-30 mins before it will turn on. At first I thought it may be overheating , but no warning signals suggest it’s that.
These are the things that I’ve done to stay and solve the problem.
Full service , engine oil filters, fuel filters, hydraulic oil filters ,air filters , changed the engine oil,changed the hydraulic oil.
Then I’ve fitted a new thermostat and switch along with replacing the alternator belt, which was worn.
Any advise would be greatfully welcomed . Is there a way of checking the electrics with a machine?
I’m struggling to find out why my machines shuts down totally after 1-2 hours work. I then turn the ignition and nothing for a few minutes until the radio comes on. But still after putting the code in, it won’t even turn over. I then have to leave it for 15-30 mins before it will turn on. At first I thought it may be overheating , but no warning signals suggest it’s that.
These are the things that I’ve done to stay and solve the problem.
Full service , engine oil filters, fuel filters, hydraulic oil filters ,air filters , changed the engine oil,changed the hydraulic oil.
Then I’ve fitted a new thermostat and switch along with replacing the alternator belt, which was worn.
Any advise would be greatfully welcomed . Is there a way of checking the electrics with a machine?
the newer machines present more complex issues so unless somebody on here has experience of this there is not anything more that I can add for you to look at; if you get it sorted please let us know what the issue was so anybody else that has this problem in the future can at least get a fair idea of what is wrong. 
Wish you the best of luck.