Hi everyone, if any one can point me in the right direction as to what to check next. I've a jcb 3c 11, I only bought the machine a few weeks ago. It was in need of a lot of work as it had been left parked up 20 years plus.
I've done a lot of work to it so far, and have it starting on the button.. Starts on half a turn.. And the engine runns very smoothly.. Ive drained the hydraulic tanks, cleaned the strainer in the tank underneath the step. Replaced the hydraulic filter the the filter housing where top it up with hydraulic fluid. All the hydraulics are working good, except the steering.. Ive no steering working at all. I've hydraulic oil coming up plessey steering unit... But no hydraulic oil coming leaving the steering unit.... Can any one point me what to check next. Any info is much appreciated. Thank u
Jcb 3c mk2 no steering any info much appreciated
-
Topic author - Posts: 4
- Joined: Tue Feb 05, 2019 10:57 pm
- Real name: Liam
- Has thanked: 1 time
- Flag:
Jcb 3c mk2 no steering any info much appreciated
You do not have the required permissions to view the files attached to this post.
-
- Posts: 810
- Joined: Mon Sep 22, 2008 11:55 pm
- Real name: David
- Location: KENT
- Has thanked: 85 times
- Been thanked: 183 times
- Flag:
Re: Jcb 3c mk2 no steering any info much appreciated
On 3C and 3D mk2 & 3 it's usually the orbital steering valve that packs up and leaks, I would contact Simon Vicary just google Vicary JCB and his website will come up, he breaks machines and is very helpfull.
Who is online
Users browsing this forum: No registered users and 4 guests