Does anyone know if Neil Beecher's 657's are still working up in Northunberland at the Widderington/West chevington OCCS? I briefly saw them working while passing the area but couldn't stop because i was working and it was a 1/2 mile trudge to where they were working.
I know Banks have a OCCS starting up soon and was wondering if they were heading there to start striping overburden?
I also believe Neil's old D9G/H is up there!
Any help would be appreciated
Regards
Mike D550
Beecher 657's
-
- Posts: 315
- Joined: Tue Mar 04, 2008 11:40 pm
- Real name: Tracshovel
- Has thanked: 142 times
- Been thanked: 36 times
- Flag:
Re: Beecher 657's
I was there in the backend last year and he only had 637 and 641's working as well as some boxes on D8s and 9H
Re: Beecher 657's
aAAAAAAAAAAAAAAAAAAAAA
Last edited by robrh120 on Mon Aug 11, 2008 8:45 pm, edited 1 time in total.
-
Topic author - Posts: 350
- Joined: Fri Apr 25, 2008 7:53 pm
- Real name: Michael Davison
- Location: North East, U.K
- Been thanked: 7 times
Re: Beecher 657's
Where are you from robrh120 ? I was told Banks were starting the stripping on that new site and had a look up there last week. Those 631's and 637's are from 1975 and still going strong! They are being push loaded by a Stokey D9T. Cannot wait till the 777f's and PC3000 arrive.
Regards
Mike D550
Regards
Mike D550
-
- Posts: 772
- Joined: Sun Sep 30, 2007 9:16 pm
- Real name: tony coates
- Been thanked: 63 times
- Flag:
Re: Beecher 657's
There is a Stokey D9 Driver that at best could say he is not keen on me, I would not let the midland banker near any kit I had to spanner on,
Amazed how they get the Job's tctractors
Amazed how they get the Job's tctractors
Re: Beecher 657's
AAAAAAAAAA
Last edited by robrh120 on Mon Aug 11, 2008 8:47 pm, edited 1 time in total.
-
Topic author - Posts: 350
- Joined: Fri Apr 25, 2008 7:53 pm
- Real name: Michael Davison
- Location: North East, U.K
- Been thanked: 7 times
Re: Beecher 657's
Hi Robrh120 - Yes that was me taking a few photos the other week, i had a day off work and thought i'd have a look up to see if i could find the site! Got some nice photos but the camera i use is a film SLR not digital.
I think it was Chris who came over in the landrover at first, he was fine, he has seen me at the foxcovert site a year or so ago and said just keep a safe distance back which is fair comment! He said the next time i come up he wants to see the photos i've taken which i will do! Later that afternoon a silver shogun headed my way and the bloke in that was OK about me taking snaps but wanted be to move further back, which i did until he went out of sight!
Am looking forward to heading up there again soon, if i do i will bring the photos up, the guy in the Stokey D9T came over and also asked me to bring the photos up next time! (not sure if he is the one you dislike tctractors)
If i plan ahead i wil try and drop a thread to say i am popping up!
Any ideas when the 777's etc are due?
Regards
Mike D550
I think it was Chris who came over in the landrover at first, he was fine, he has seen me at the foxcovert site a year or so ago and said just keep a safe distance back which is fair comment! He said the next time i come up he wants to see the photos i've taken which i will do! Later that afternoon a silver shogun headed my way and the bloke in that was OK about me taking snaps but wanted be to move further back, which i did until he went out of sight!
Am looking forward to heading up there again soon, if i do i will bring the photos up, the guy in the Stokey D9T came over and also asked me to bring the photos up next time! (not sure if he is the one you dislike tctractors)
If i plan ahead i wil try and drop a thread to say i am popping up!
Any ideas when the 777's etc are due?
Regards
Mike D550
-
- Posts: 772
- Joined: Sun Sep 30, 2007 9:16 pm
- Real name: tony coates
- Been thanked: 63 times
- Flag:
Re: Beecher 657's
Ask his name, if his initals are A.B. its the same driver??? then I will tell you the reason he is not to keen on me.
tctractors
tctractors
Who is online
Users browsing this forum: No registered users and 18 guests