Nick dawkins is still with keirs hes running a job am working on at the moment in grantham?
dont know about being handy with the pen though? only been on site a couple of days?
Martin
C J Pryor
-
- Posts: 361
- Joined: Wed Mar 12, 2008 11:05 pm
- Real name: Jim M
- Location: Devon, England
- Has thanked: 58 times
- Been thanked: 86 times
- Flag:
Re: C J Pryor
Hi Gary. Nice to hear he's still about, I'm doing grader work at the moment mate around the local quarries keeping the haul roads in good condition, well trying . As Martin50 said he's working on his site up at Grantham. Martin he 's a really nice bloke and when you see him ask him if he remembers Jim who drove the Case cx130 and a dumper for Bill Daniels down at Langage Power Station, give him my regards will you and ask him if he's going to work at Hinkley Point Power station in somerset for kiers at some point?
Jim
Jim
Re: C J Pryor
modelman093 wrote:john wrote:The company based at Harlow Common. You dont seem to see much about them, but I remember they ran a lot of CAT's and other big plant plus a lot of 8wheelers
has anybody got any pictures?
Will these do?
Sorry about the quality but I was doing my own processing at the time with varying success!
All taken in about 1963 at Roxwell just outside Chelmsford.
Angus
Angus these a good pics do you know if my father in law john kitchener was involved
thanks
Russell
Last edited by cat235 on Thu Jul 28, 2011 9:36 pm, edited 1 time in total.
Re: C J Pryor
tim wrote:john wrote:The company based at Harlow Common. You dont seem to see much about them, but I remember they ran a lot of CAT's and other big plant plus a lot of 8wheelers
has anybody got any pictures?
A few odd pics- the first two from a magazine article about Stansted 1989.
Tim
hey was that Mark Proctor on the 245
-
- Posts: 106
- Joined: Tue Dec 15, 2009 3:58 pm
- Real name: tristam
- Has thanked: 3 times
- Been thanked: 16 times
-
- Posts: 646
- Joined: Wed Jan 23, 2008 12:18 am
- Real name: Angus Shapland
- Has thanked: 8 times
- Been thanked: 72 times
- Flag:
Re: C J Pryor
cat235 wrote:tim wrote:john wrote:The company based at Harlow Common. You dont seem to see much about them, but I remember they ran a lot of CAT's and other big plant plus a lot of 8wheelers
has anybody got any pictures?
A few odd pics- the first two from a magazine article about Stansted 1989.
Tim
hey was that Mark Proctor on the 245
Quite a few pics of Pryor's TS14s and D8s and boxes stripping for a gravel pit at Roxwell near Chelmsford in the early 60s .
Have posted some on this forum in the past so they must be lurking somewhere!
Angus
-
- Posts: 1
- Joined: Thu Jun 14, 2012 9:27 pm
- Real name: dave proctor
Re: C J Pryor
modelman093 wrote:cat235 wrote:tim wrote:john wrote:The company based at Harlow Common. You dont seem to see much about them, but I remember they ran a lot of CAT's and other big plant plus a lot of 8wheelers
has anybody got any pictures?
A few odd pics- the first two from a magazine article about Stansted 1989.
Tim
hey was that Mark Proctor on the 245
Quite a few pics of Pryor's TS14s and D8s and boxes stripping for a gravel pit at Roxwell near Chelmsford in the early 60s .
Have posted some on this forum in the past so they must be lurking somewhere!
Angus
hi
mark proctor is my old man.
he still works for pryors and i used to for a while, just wondered if you still have the photos as i would love to see them..cant seem to open them on here.
many thanks dave
Re: C J Pryor
Hi ,I used to work for Pryors for about 17 years from 1966 to 1983,I was on the 637s ,631s and ts14s.Started on an old Drott at Rainham, then went on a 951 and on to the scrapers, first job was at Roxwell pits where I think Dave Pledger was push loading with a cat 52a.Joe Pitts and Snowy White where on the other scrapers.Anyone remember Harry Cole,Ken Rand,Peter Chapman, and Ron Futcher. Paul
-
- Posts: 646
- Joined: Wed Jan 23, 2008 12:18 am
- Real name: Angus Shapland
- Has thanked: 8 times
- Been thanked: 72 times
- Flag:
Re: C J Pryor
p-wit wrote:Hi ,I used to work for Pryors for about 17 years from 1966 to 1983,I was on the 637s ,631s and ts14s.Started on an old Drott at Rainham, then went on a 951 and on to the scrapers, first job was at Roxwell pits where I think Dave Pledger was push loading with a cat 52a.Joe Pitts and Snowy White where on the other scrapers.Anyone remember Harry Cole,Ken Rand,Peter Chapman, and Ron Futcher. Paul
Taken at Roxwell around about 1965
You do not have the required permissions to view the files attached to this post.
Re: C J Pryor
Hi Modelman093, second from the left is Harry Cole,third along is John Kitchener,Russel (cat 235) would know him very well,I think the first one might be Denny Ellender who showed me the ropes on the ts14.I got put on a 631b on the Hoddesdon Bypass after the euc rear axle broke ,thats what happens when you try to keep up with 631s and 637s on a long haul.
Who is online
Users browsing this forum: No registered users and 6 guests