ROAD ROLLER
-
Topic author - Posts: 6393
- Joined: Mon Nov 03, 2008 8:06 pm
- Real name: MARTYN WILLIAMS
- Location: South Wales
- Has thanked: 296 times
- Been thanked: 359 times
ROAD ROLLER
I am working on a number of projects at the present time,one is an Aveling Barford GA roller fitted with a Ford side valve engine.The roller was built in 1953 and was used by Haverford west council.I will be restoring this roller to its original condition.Will post update and photo shortly.
-
Topic author - Posts: 6393
- Joined: Mon Nov 03, 2008 8:06 pm
- Real name: MARTYN WILLIAMS
- Location: South Wales
- Has thanked: 296 times
- Been thanked: 359 times
Re: ROAD ROLLER
This is my 1953 Aveling Barford.
Martyn
Martyn
You do not have the required permissions to view the files attached to this post.
-
Topic author - Posts: 6393
- Joined: Mon Nov 03, 2008 8:06 pm
- Real name: MARTYN WILLIAMS
- Location: South Wales
- Has thanked: 296 times
- Been thanked: 359 times
Re: ROAD ROLLER
Hello Ross,the badge is on the front,does not show up in the picture.I have sent the magneto away for servicing.Hope to take it to a steam fair in September.
-
Topic author - Posts: 6393
- Joined: Mon Nov 03, 2008 8:06 pm
- Real name: MARTYN WILLIAMS
- Location: South Wales
- Has thanked: 296 times
- Been thanked: 359 times
Re: ROAD ROLLER
I sent the magneto for repair last week,rang to find out how its doing.They have repaired it already,hope to get the roller up and running soon.
The magneto is back and the roller is a runner,the engine runs sweet and even sounds like an old ford pop!!
The magneto is back and the roller is a runner,the engine runs sweet and even sounds like an old ford pop!!
-
Topic author - Posts: 6393
- Joined: Mon Nov 03, 2008 8:06 pm
- Real name: MARTYN WILLIAMS
- Location: South Wales
- Has thanked: 296 times
- Been thanked: 359 times
Re: ROAD ROLLER
Took it for a test drive today,it works well.Acouple of minor jobs and a respray are the next moves.
-
Topic author - Posts: 6393
- Joined: Mon Nov 03, 2008 8:06 pm
- Real name: MARTYN WILLIAMS
- Location: South Wales
- Has thanked: 296 times
- Been thanked: 359 times
Re: ROAD ROLLER
Started on the restoration of the roller,the steering wheel has been renewed,water tank removed for repairs.Brazed up the pinholes in it and flushed out the tank.Not many repairs left to do.On the engine,needs a new top hose and an oil change,the tank will be rubbed down and primed.Looking for a seat for the roller, anyone know of one?
Will then prepare the roller for painting.Amate of mine in the Road Roller Asc. is making a brass nameplate for me.The roller will be named HOLLY after my daughter.Will post pictures soon.
Will then prepare the roller for painting.Amate of mine in the Road Roller Asc. is making a brass nameplate for me.The roller will be named HOLLY after my daughter.Will post pictures soon.
Last edited by martyn williams on Sun Nov 04, 2007 3:10 pm, edited 1 time in total.
-
Topic author - Posts: 6393
- Joined: Mon Nov 03, 2008 8:06 pm
- Real name: MARTYN WILLIAMS
- Location: South Wales
- Has thanked: 296 times
- Been thanked: 359 times
Re: ROAD ROLLER
The cast brass namplates are now finished, they will be fitted to the roller and will have a red background.My daughter is very pleased.My mate from Derby has done a great job making the pattern and casting.
You do not have the required permissions to view the files attached to this post.
Last edited by martyn williams on Mon Nov 12, 2007 6:16 pm, edited 1 time in total.
Who is online
Users browsing this forum: No registered users and 21 guests