Trying to what model Fiat these track plates fit

Discuss dozers here

Topic author
Cliffy
Posts: 2
Joined: Mon Jun 30, 2014 2:11 am
Real name: Red

Trying to what model Fiat these track plates fit

Post #1 by Cliffy » Mon Jun 30, 2014 12:04 pm

Trying to what model Fiat these track plates fit
You do not have the required permissions to view the files attached to this post.


Topic author
Cliffy
Posts: 2
Joined: Mon Jun 30, 2014 2:11 am
Real name: Red

Re: Trying to what model Fiat these track plates fit

Post #2 by Cliffy » Mon Jun 30, 2014 12:10 pm

Overall dimensions are 400mm x 178mm, large holes are 17.5mm, small holes are 12.7mm in diameter. I have been told, These fit models that came out around 1960. These could be used on some later models (not many around) if the holes were drilled out to suit a 9/16" (14.75mm) bolt. I am keen to confirm info and would appreciate all help thanx.


JimInOz
Posts: 346
Joined: Sun Jan 18, 2009 11:15 am
Real name: Jim
Location: Australia
Has thanked: 5 times
Been thanked: 20 times
Flag: Australia

Re: Trying to what model Fiat these track plates fit

Post #3 by JimInOz » Wed Jul 09, 2014 12:25 pm

Nice OEM plates.

Try your local Berco agent.The 100x56 spacings are the relevant holes.
GW Tractors,here in Oz,might know their parent crawler.

The MF300 (9 ton) comes up at 108 x 56.That's the closest I can find.
MF used Fiat chains for their smaller crawlers.

I reckon they'll be off a Fiat or Landini Ag tractor...about 6-8 ton size.

The Fiat crawlers had a good reputation here..the 555 & 605 etc were good Ag dozers.Also the AT 70/70C were well-liked.

Jim


Return to “Dozers”

Who is online

Users browsing this forum: No registered users and 12 guests